SERVICE AND ADJUSTMENTS

TO CHECK AND ADJUST BRAKE (See Fig. 21)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than fi ve (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

•Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

•Disengage transmission by placing freewhel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

•Depress clutch/brake pedal all the way down and en- gage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-9/16", loosen jam nut and turn nut “A” until distance becomes 1-9/16". Retighten jam nut against nut “A”.

•Engage transmission by placing freewheel control in “transmission engaged” position.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than fi ve (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualified service center.

WITH PARKING BRAKE “ENGAGED”

NUT “A”

1-9/16”

JAM NUT

 

OPERATING

ARM

01513

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE ADJUST- MENT IS NECESSARY CONTACT YOUR NEAREST AUTHO- RIZED SERVICE CENTER/DEPARTMENT

FIG. 21

TO REPLACE MOTION DRIVE BELT (See Fig. 22)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

•Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

•Remove belt from stationary idler and clutching idler.

•Remove belt downward from around engine pulley.

•Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

•Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

•Carefully work new belt down around transmission cooling fan and onto the input pulley.

•Slide belt into the center span keeper.

•Pull belt toward front of tractor and roll around the top groove of engine pulley.

•Install belt through stationary idler and clutching idler.

•Make sure belt is in all pulley grooves and inside all belt guides and keepers.

•Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

TRANSMISSION

INPUT PULLEYCENTER SPAN KEEPER

FIG. 22

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 23)

The motion control lever has been preset at the factory and adjustment should not be necessary.

•Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

•Start engine and move motion control lever until tractor does not move forward or backward.

•Hold motion control lever in that position and turn engine

21 off.

Page 20 Page 22
Page 21
Image 21
Poulan XT185H42LT To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig, To Check Brake, To Adjust Brake
Page 20 Page 22

XT185H42LT specifications

The Poulan XT185H42LT is a robust riding lawn mower designed for homeowners seeking efficiency and reliability in their lawn care routine. With its powerful engine and user-friendly features, the XT185H42LT is an excellent choice for maintaining medium to large-sized lawns.

At the heart of the XT185H42LT is its high-performance 18.5 horsepower Briggs & Stratton engine. This engine provides ample power to tackle thick grass and uneven terrain, ensuring a clean and even cut every time. The engine is designed for durability and easy maintenance, with features that simplify oil changes and filter replacements.

The mower boasts a 42-inch steel cutting deck, which allows for wider cutting paths, reducing the number of passes needed to mow the lawn. This feature not only saves time but also enhances efficiency. The cutting deck offers a range of cutting heights, which can be easily adjusted to suit different grass types and conditions, ensuring optimal performance throughout the mowing season.

One of the standout technologies included in the XT185H42LT is its infinitely variable speed transmission. This allows users to control the mowing speed seamlessly, adapting to varying lawn conditions and ensuring that even challenging areas can be mowed effectively. The raceway steering makes maneuverability effortless, allowing the user to navigate around obstacles like flower beds, trees, and garden ornaments with ease.

Comfort and convenience are key aspects of the XT185H42LT. The mower features an ergonomic seating position, with a plush high-back seat designed to reduce fatigue during longer mowing sessions. Easy-access controls are strategically placed to allow for smooth operation, and the built-in cup holder adds a touch of convenience for extended use on warm days.

Additional features include a quick-release deck for easy cleaning and maintenance, as well as a mulching capability that finely chops clippings, returning vital nutrients to the lawn. Overall, the Poulan XT185H42LT combines power, efficiency, and user comfort, making it a versatile choice for homeowners looking to optimize their lawn maintenance efforts. Whether tackling daily mowing tasks or handling larger projects, the XT185H42LT delivers performance and reliability every time.
Top Page Image Contents