To Move Forward and Backward See Fig | Poulan XT19H42YT manual

FIG.9

OPERATION

TO MOVE FORWARD AND BACKWARD (See Fig. 7)

The direction and speed of movement is controlled by the motion control lever. (J)

•Start tractor with motion control lever in neutral (N) position.

•Release parking brake.

•Slowly move motion control lever to desired position.

FIG. 7

TO ADJUST MOWER CUTTING HEIGHT (See Fig. 8)

The position of the attachment lift lever (A) determines the cutting height.

TO ADJUST GAUGE WHEELS (See Fig. 9)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust gauge wheels with tractor on a ﬂat level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in this section of manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole. Tighten securely.

•Repeat for all, installing gauge wheel in same adjust- ment hole.

FIG. 8

•Put attachment lift lever in desired cutting height slot.

•Slide pointer tab (T) to desired cutting height as a reminder for next time you mow.

The cutting height range is approximately 1" to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

•The average lawn should be cut to approximately 2-1/2 inches during the cool season and to over 3 inches during hot months. For healthier and better looking lawns, mow often and after moderate growth.

•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the ﬁrst cut relatively high; the second to desired height.

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut with attachment lift lever.

•Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deﬂector shield (S) in place.

FIG. 10

XT19H42YT specifications

The Poulan XT19H42YT is a robust and versatile lawn tractor designed to meet the needs of both homeowners and landscaping professionals. With its powerful engine and comprehensive features, this model offers exceptional performance and durability for various mowing tasks.

At the heart of the XT19H42YT is a reliable 19 horsepower engine. This engine provides the necessary power to handle larger lawns and more challenging terrains with ease. It is designed for optimal fuel efficiency, allowing for extended run times without the need for frequent refueling. Coupled with an automatic transmission, users can experience a smooth and effortless driving experience, making it easy to navigate through tight spaces and around obstacles.

One of the standout features of the XT19H42YT is its 42-inch cutting deck. This mid-sized deck is ideal for mowing in various conditions, allowing users to cut a wide swath with each pass. The cutting height is easily adjustable, providing the flexibility to achieve the desired length for different grass types or seasonal changes. The deck is also designed for enhanced airflow, which promotes a clean and even cut while preventing clumping.

Another impressive characteristic of the Poulan XT19H42YT is its Hydrostatic transmission. This technology allows for seamless speed adjustments without the need for shifting gears, enabling the operator to maintain full control over the tractor's speed depending on the mowing conditions. This feature is especially useful when transitioning between different terrain types or navigating around trees and flower beds.

The XT19H42YT also includes ergonomic features such as an adjustable high-back seat, offering comfort during extended mowing sessions. The easy-access controls ensure that everything from starting the engine to adjusting the cutting height is within easy reach, enhancing the overall user experience.

The tractor is equipped with sturdy construction and reliable components that contribute to its longevity and performance. With a steel chassis and reinforced cutting deck, the Poulan XT19H42YT is built to withstand the rigors of regular use, making it a solid investment for any lawn care enthusiast.

In summary, the Poulan XT19H42YT stands out with its powerful 19 horsepower engine, efficient hydrostatic transmission, and versatile 42-inch cutting deck. Its robust build quality and user-friendly features make it an excellent choice for anyone looking to maintain their lawn with efficiency and ease.

Poulan XT19H42YT To Move Forward and Backward See Fig, To Adjust Mower Cutting Height See Fig

Models: XT19H42YT