Poulan XT20H46YT manual To Replace Mower Drive Belt See Fig, To Check Brake

Models: XT20H46YT

1 64
Download 64 pages 19.48 Kb
Page 21
Image 21

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER DRIVE BELT (See Fig. 26)

MOWER DRIVE BELT REMOVAL

Park tractor on a level surface. Engage parking brake.

Lower attachment lift lever to its lowest position.

Remove any dirt or grass clippings which may have accumulated around mandrels and entire upper deck surface.

Remove belt from electric clutch pulley (M), both mandrel pulleys (R) and all idler pulleys (S).

MOWER DRIVE BELT INSTALLATION

Install belt around all mandrel pulleys (R) and around idler pulleys (S) as shown.

Install belt onto electric clutch pulley (M).

IMPORTANT: Check belt for proper routing in all mower pulley grooves.

Raise attachment lift lever to highest position.

S

M

R

R

FIG. 26

TO CHECK BRAKE

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be serviced.

You may also check brake by:

1.Park tractor on a level, dry concrete or paved surface, depress brake pedal all the way down and engage parking brake.

2.Disengage transmission by placing freewheel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manu- ally push the tractor forward. If the rear wheels rotate, then the brake needs to be serviced. Contact a qualified service center.

TO REPLACE MOTION DRIVE BELT (See Fig. 27)

Park the tractor on level surface. Engage parking brake.

 

For assistance, there is a belt installation guide decal on

 

bottom side of left footrest.

21

 

BELT REMOVAL -

1.Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Remove belt from stationary idler (A) and clutching idler (B).

3.Remove belt from centerspan idler (C).

6.Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades (D).

4.Remove belt downward from engine pulley (E).

5.Slide belt toward rear of tractor, off the steering plate

(F) and remove from tractor.

BELT INSTALLATION -

1.Install new belt from tractor rear to front, over the steer- ing plate (F) and above clutch brake pedal shaft (G).

2.Pull belt toward front of tractor and roll belt onto engine pulley (E).

3.Pull belt toward rear of tractor. Carefully work belt down around transmission cooling fan and onto the input pulley (D). Be sure belt is inside the belt keeper.

4.Install belt on centerspan idler (C).

5.Install belt through stationary idler (A) and clutching idler (B).

6.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

7.Install mower (See “TO INSTALL MOWER” in this section of manual).

E

F

A

B G

C

D

FIG. 27

Page 21
Image 21
Poulan XT20H46YT manual To Replace Mower Drive Belt See Fig, To Check Brake, To Replace Motion Drive Belt See Fig

XT20H46YT specifications

The Poulan XT20H46YT is a robust and versatile riding lawn mower designed for homeowners seeking efficiency and performance in their lawn care routine. Built with power and durability in mind, this model showcases a variety of features that cater to different mowing needs and preferences.

At the heart of the XT20H46YT is its powerful 20 HP Briggs & Stratton engine, which delivers reliable performance across various terrains. The engine's design includes an easy starting system, ensuring that users can get to mowing without the frustration of traditional pull-starts. This engine pairs seamlessly with a hydrostatic transmission, allowing for smooth acceleration and effortless control of speed. This eliminates the need for shifting gears, making it user-friendly for both novice and experienced operators.

One of the standout features of the XT20H46YT is its 46-inch cutting deck. This mid-sized deck strikes an ideal balance between maneuverability and cutting efficiency, allowing users to cover larger areas while maintaining a compact size suitable for residential lawns. The mowing deck also includes a cutting height adjustment feature, which offers six preset positions, enabling homeowners to customize their lawn's appearance based on personal preference and grass type.

The Poulan XT20H46YT takes advantage of advanced technologies to enhance the user experience. Its reinforced frame construction adds durability, ensuring that the mower can withstand the rigors of regular use. Furthermore, the mower boasts larger rear tires that improve traction and stability, especially when navigating uneven surfaces or inclines.

Comfort is another priority for Poulan, and the XT20H46YT is equipped with a comfortable, high-back seat that provides support during extended mowing sessions. The ergonomically designed steering wheel is positioned for easy access, and the simple control layout allows for intuitive operation, minimizing distractions while focusing on the task at hand.

Maintenance is made easier with features such as an accessible deck wash port, which simplifies the cleaning process after mowing. Regular maintenance is crucial for optimal performance, and this added convenience encourages users to keep their equipment in top shape.

In summary, the Poulan XT20H46YT is an impressive riding lawn mower that combines power, comfort, and advanced features. With its dependable engine, user-friendly hydrostatic transmission, and versatile cutting deck, this model is a sound investment for anyone looking to maintain a pristine lawn with ease and efficiency.