SERVICE AND ADJUSTMENTS

TO CHECK AND ADJUST BRAKE (See Fig. 25)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than fi ve (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and en- gage parking brake.

Disengage transmission by placing freewhel control in “transmission disengaged” position. Pull freewheel control out and into the slot and release so it is held in the disengaged position.

The rear wheels must lock and skid when you try to manually push the tractor forward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

Depress clutch/brake pedal all the way down and en- gage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-9/16", loosen jam nut and turn nut “A” until distance becomes 1-9/16". Retighten jam nut against nut “A”.

Engage transmission by placing freewheel control in “transmission engaged” position.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than fi ve (5) feet in highest gear, further maintenance is necessary. Replace brake pads or contact a qualifi ed service center.

WITH PARKING BRAKE “ENGAGED”

1-9/16”

NUT “A”

JAM NUT

OPERATING

ARM

01513

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE ADJUSTMENT IS NECESSARY CONTACT YOUR NEAREST AUTHORIZED SER- VICE CENTER/DEPARTMENT

FIG. 25

TO REPLACE MOTION DRIVE BELT (See Fig. 26)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

Remove mower (See “TO REMOVE MOWER” in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

Disconnect clutch wire harness.

Remove clutch locator.

Remove belt from stationary idler and clutching idler.

Remove belt downward from engine pulley and around electric clutch.

Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

Carefully work new belt down around transmission cooling fan and onto the input pulley.

Slide belt into the center span keeper.

Pull belt toward front of tractor and roll belt around electric clutch and onto engine pulley.

Install belt through stationary idler and clutching idler.

Reinstall clutch locator and tighten nut securely.

Reconnect clutch harness.

Make sure belt is in all pulley grooves and inside all belt guides and keepers.

Install mower (See “TO INSTALL MOWER” in this sec- tion of manual).

ELECTRIC

CLUTCH

CLUTCH

LOCATOR

 

CLUTCHING

 

IDLER

 

STATIONARY

 

IDLER

 

CENTER SPAN

KEEPER

TRANSMISSION

INPUT PULLEY CLUTCH WIRE HARNESS

01511

FIG. 26

23

Page 23
Image 23
Poulan YTH2148 owner manual To Check and Adjust Brake See Fig, To Replace Motion Drive Belt See Fig

YTH2148 specifications

The Poulan YTH2148 is a powerful and versatile riding lawn mower designed for homeowners who value efficiency and quality in lawn care. With its robust build and user-friendly features, this tractor stands out as a reliable option for maintaining medium to large-sized lawns.

One of the main features of the YTH2148 is its 21.5 HP Briggs & Stratton engine. This reliable engine provides ample power for tackling tough grass and uneven terrains, ensuring a consistent performance throughout your mowing tasks. Additionally, the easy-start ignition system makes getting the engine running hassle-free, allowing you to start your mowing session with minimal delay.

The cutting deck on the Poulan YTH2148 measures 48 inches in width, making it suitable for covering large areas quickly. The deck is made from durable steel, designed to withstand the rigors of regular use. Furthermore, the mower features a deck lift system that is simple and efficient, allowing you to adjust the cutting height with ease. The cutting height can be set in multiple positions, ranging from 1.5 to 4 inches, enabling you to achieve the perfect cut for your lawn type.

Another notable characteristic of the YTH2148 is its hydrostatic transmission. This advanced technology provides smooth and effortless speed control without the need for manual shifting. This feature is particularly beneficial when navigating around obstacles or making tight turns, as it allows for seamless acceleration and deceleration.

Comfort is also a priority in the design of the Poulan YTH2148. The mower is equipped with an ergonomic seat that provides ample cushioning and back support, ensuring that you can mow for extended periods without discomfort. The wide footrests and easy-to-reach controls further enhance the rider's comfort and ease of operation.

For added convenience, the YTH2148 features a compact design, making it easy to maneuver in tight spaces and around landscaping features. With a turning radius of 16 inches, it can navigate flower beds and garden edges with precision.

Overall, the Poulan YTH2148 combines power, efficiency, and comfort in a well-designed package, making it an exceptional choice for those who take pride in their lawn care. Whether you are a seasoned lawn care expert or a homeowner looking to maintain your yard, the YTH2148 delivers performance and reliability that you can count on.