PAB-21X
PREPARATION
Required tools
The basic tools that you must obtain before assembling the
•Standard Wrench Set
•Metric Wrench Set
•Adjustable Wrench
•Standard / Metric Allen Key Set
Installation Requirements
Follow these installation requirements when assembling the
Set up the
Provide ample space around the machine. Open space around the machine allows for easier access.
For aesthetic purposes, insert all bolts in the same direction unless specified (in text or illustrations) to do otherwise.
Leave room for adjustments. Tighten fasteners such as bolts, nuts, and screws so the unit is stable, but leave room for adjustments. Do not fully tighten fasteners until instructed in the assembly steps to do so.
Fill out and mail the warranty card.
Ordering Replacement Parts
If you need to order replacement parts please be prepared to provide the following information when contacting us so that we can assist you better.
1.Model Number
2.Place of Purchase
3.Serial Number (S/N)
4.Part # and Description
Assembly Tips
Read all “Notes” on each page before beginning each step.
While you may be able to assemble the
Some pieces may have extra holes that you will not use. Use only those holes indicated in the instructions and illustrations.
NOTE: With so many assembled parts, proper alignment and adjustment is critical. While tightening the nuts and bolts, be sure to leave room for adjustments.
NOTE: The bottles that are marked “Poison” is your touch up paint. Keep away from children.
+,-./01: Obtain assistance! If you feel like you can’t assemble the
YOUR S/N # CAN
BE FOUND HERE
5