MAJOR GENERATOR FEATURES

*4 HP Subaru OHV/OHC engine

*Receptacles on endbell

*Battery charger

*1.3 gallon plastic fuel tank

*Spark arrester

*Brushless generator

ENDBELL

A . 120 V, 15 Ampere Duplex Receptacle

15 amps of current may be drawn from each half of the receptacle. However, total power drawn must be kept within nameplate ratings.

B.Circuit Breaker

The receptacles are protected by an AC circuit breaker. If

the generator is overloaded or an external short circuit occurs, the circuit breaker will trip. If this occurs, disconnect all electrical loads and try to determine the cause of the problem before attempting to use the generator again. If overloading causes the circuit breaker to trip, reduce the load. NOTE:

Continuous tripping of the circuit breaker may cause damage to generator or equipment. The circuit breaker may be reset by pushing the button of the breaker.

C.Engine Switch

 

 

 

 

 

 

RECEPTACLE PANEL

RECOIL PANEL

 

 

 

 

 

D.Battery Charger

NOT RECOMMENDED FOR USE WITH GEL PACK,

SEALED OR SMALL (MOTORCYCLE) BATTERIES. This generator contains an additional circuit used for

battery charging purposes. A DC accessory receptacle is provided on the control panel. A battery charging cable equipped with a matching plug for this receptacle has been supplied with the unit. Line up metal prongs on plug with arrows on receptacle to secure.

The battery charger on this generator is referred to as an unregulated taper charger - the most widely used in the market today. The amount of current flowing will depend on the

charging voltage and battery's state of charge. As the battery becomes more fully charged, the output current to the battery decreases and nearly becomes constant. Taper chargers are intended to be used with the provision that they will be disconnected from the battery after a maximum time on charge. Normally a period of 30 to 120 minutes is sufficient to recharge a weak battery. The charge level of the battery should be checked periodically.

CAUTION: This battery charging system is intended to recharge weak batteries, not to "boost start" vehicles. Do not overcharge battery or leave battery unattended.

Note: When the battery charger circuit is in use, the AC capacity is reduced by 180 watts. Make sure the combined load is within the rated limits.

Before charging a storage battery, check the electrolyte fluid level in all the cells. Add distilled water to each cell, if necessary, to bring the level back up to the manufacturer's required level.

WARNING: Storage batteries give off EXPLOSIVE hydrogen gas while charging. Do not allow smoking, open flames,sparks, or spark producing equipment in the area while charging.

Use cables approved for battery charging. Connect a red clip to the positive terminal of the battery. Connect a black clip to the negative terminal of the battery. Connect the other end of the cable to the DC accessory receptacle on the generator panel. After the battery is fully charged, remove the battery charging cable from the generator and then disconnect from the battery posts.

WARNING: Battery electrolyte fluid is comprised of sulfuric acid that can be very dangerous and cause severe burns. Do not allow this fluid to contact eyes, skin, clothing, etc. If contact or spillage does occur, flush the area with water immediately.

WARNING: Do not continue to charge a battery that becomes hot or is fully charged.

DC CIRCUIT BREAKER: The maximum current available from the battery charger circuit is 15 amps. An automatic DC circuit breaker has been provided to protect the circuit from overloads and assure that the battery gets recharged. If an overload occurs, the circuit breaker will trip. After it cools, it will automatically reset itself. The battery's maximum rate of charge will eventually reduce to less than 15 amps and then to zero as the battery approaches a 100 percent state of charge.

 

 

English

2

 

 

Page 2
Image 2
Powermate PMC431800.01 manual Major Generator Features, Endbell, 120 V, 15 Ampere Duplex Receptacle, Circuit Breaker

PMC431800.01 specifications

The Powermate PMC431800.01 is an advanced industrial-grade portable generator designed to meet the power demands of various applications ranging from construction sites to outdoor events. This generator stands out due to its combination of durability, efficiency, and user-friendly features, making it a popular choice among professionals and DIY enthusiasts alike.

One of the key features of the PMC431800.01 is its powerful engine. Equipped with a robust 430cc engine, it delivers a substantial power output of 3,500 watts running and 4,800 watts surge. This ensures that users can run multiple tools and appliances simultaneously, making it ideal for heavy-duty tasks. The engine is designed for fuel efficiency and extended runtime, offering a fuel tank capacity that allows for hours of continuous operation.

The generator's steel frame construction provides exceptional durability and protection against the elements. Designed to withstand tough working conditions, it has a compact design that facilitates easy transport and storage. The presence of pneumatic wheels enhances mobility, while the foldable handles make it convenient to maneuver.

User safety and convenience have been prioritized in the design of the Powermate PMC431800.01. It features a low oil shutdown system, which automatically turns off the engine when oil levels drop below a safe limit, thereby preventing engine damage. The generator also has a circuit breaker that protects against overloads, ensuring reliability during operation.

In terms of technologies, this generator uses an advanced inverter system that provides clean and stable power, making it suitable for sensitive electronic devices. The inverter technology reduces harmonic distortion, allowing users to safely power laptops, smartphones, and other gadgets without the risk of damaging them.

The PMC431800.01 also features multiple outlets, including 120V and 12V options, allowing users to connect various devices. The presence of USB ports adds even more versatility, making it easy to charge smaller electronics on the go.

Maintenance is straightforward with the Powermate PMC431800.01, thanks to its easily accessible components. Regular upkeep is made easier with its user-friendly design, ensuring longevity and consistent performance.

In conclusion, the Powermate PMC431800.01 generator combines power, durability, and innovative technologies to provide a reliable solution for those in need of portable power. With its powerful engine, inverter technology, and safety features, it represents an excellent investment for both professional and recreational users.