PORTABILITY KIT INSTALLATION

TOOLS REQUIRED: Hammer, 1/2” wrench, ratchet with a 1/2” socket, and wood blocks.

Refer to the drawing for proper alignment of Foot bracket and Wheel brackets.

Refer to the parts list on pages 15 and 16.

Wheel Bracket & Wheel Installation

1.Block up end of generator, about 8” high, opposite the fuel tank cap to install wheels and wheel bracket assy.

2.Add 5/16 washer (item 29) to the 1 3/4” bolts (item 71) and insert bolts/washers through the holes located in the base pan of the carrier.

3.Place the wheel bracket (item 65) through the bolts and add a 5/16 nyloc nut (item 27) and tighten securely. (On the bottom side of the pan in-between the holes will be a 1” square brace, the wheel bracket will set on this brace).

4.Add wheel spacer (item 70) to the axle.

5.Slide the wheel (item 64) onto the axle until it is snug against the spacer. The wheel is on correctly if there is approximately a 1/2” gap between the carrier tubing and the side of the wheel. If it is less then 1/2” from the carrier, turn the wheel over and reinstall. Align the wheels parallel to the carrier tubing and tighten nuts securly. To align correctly, the bolts holding the wheel bracket may have to be loosened.

6.With a hammer, add the plastic cap (item 69) on end of axle.

7.Repeat above instructions for the remaining wheel.

Foot bracket Installation

1.Block up opposite end of the unit, about 8” high.

2.Add 5/16 washer (item 29) to 1” bolts (item 30) and place through holes in the base pan.

3.Add foot bracket assembly (item 66) to bolts, add 5/16 nyloc nuts (item 27) and tighten securely.

4.Add support bracket (item 68) from foot bracket to the base pan. Secure in place with 1” bolts (item 30), washers (item 29) and 5/16 nyloc nuts (item 27).

Locking Handle

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

1.

Attach the lanyards (item 72) to the release

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

pins (item 73) and carrier as shown in the

 

 

 

 

 

 

 

2.

illustration.

 

 

 

 

 

 

 

To lock the handle in the extended position,

 

 

 

 

 

 

 

 

 

72

 

 

 

 

 

align the holes in the handle brackets with the

 

 

 

 

 

 

 

73

 

 

holes in the carrier brackets and insert the

 

 

 

 

 

 

 

 

 

 

 

release pins.

4

 

English

 

 

 

 

Page 4
Image 4
Powermate PMC601200 manual Portability KIT Installation, Foot bracket Installation, Locking Handle

PMC601200 specifications

The Powermate PMC601200 is a robust portable generator designed to cater to the power needs of both residential and commercial users. This generator stands out for its blend of performance, efficiency, and user-friendly features.

One of the key characteristics of the PMC601200 is its powerful engine. Fueled by a reliable 12,000-watt peak and 9,500-watt running capacity, this generator ensures that you can run essential appliances, tools, and equipment during power outages or while working off-grid. The powerful engine is designed to deliver consistent performance, making it suitable for various applications, from home backup to job site power solutions.

The PMC601200 is equipped with advanced technologies that enhance its usability and safety. It features a close-frame design that provides additional stability and protection, ensuring the generator remains securely positioned during operation. The design also allows for easier transportation, as it typically includes built-in wheels and handles. This is particularly advantageous for users who need to move the generator frequently.

In terms of user convenience, the generator features an electric start mechanism, which eliminates the hassle of manual recoil starting. With just the push of a button, users can get the generator running quickly, even in adverse weather conditions. The intuitive control panel includes multiple outlets, ensuring compatibility with various devices and ensuring safe, organized power distribution.

Safety is a top priority with the Powermate PMC601200. It comes equipped with features like low oil shutdown, which automatically turns off the engine to prevent damage when oil levels are too low. This not only extends the lifespan of the generator but also enhances operational safety by reducing the risk of engine failure.

The generator is also relatively quiet compared to traditional gas generators, making it a suitable choice for neighborhoods and places where noise restrictions may apply. Its durable construction, combined with a long runtime, ensures that users have dependable power supply when it matters most.

In conclusion, the Powermate PMC601200 is a powerful, portable generator that embodies efficiency and convenience. With its advanced technologies, safety features, and ease of use, it is an ideal solution for anyone looking to maintain power during outages or on-demand for outdoor activities. Whether for home backup or commercial use, the PMC601200 proves to be a versatile and reliable choice.