5
22. Give your work undivided attention. Looking around, carrying on a conv ersation and “hor se-play” are
careless acts that can result in serious injury.
23. Maintain a balanced stance at all times so that you do not fall or lean against the cent ers, workpiece
or other moving parts. Do not overreach or use excessive force to perform any machine operation.
24. Use the right tool at the correct speed and f eed rat e. Do not force a t ool or attac hment to do a j ob for
which it was not designed. The right tool will do the job better and safer.
25. Use recommended accessories; im pr oper accessories may be hazardous.
26. Keep turning tools sharp and clean for the best and safest perform ance, and position the tools
properly in relation to the workpiece.
27. Turn off the machi ne bef ore cleaning. Use a brush or compressed air to rem ove chips or debris — do
not use your hands.
28. Do not stand on the machine. Serious injury c ould oc c ur if the mac hine tips over.
29. Never leave the Lathe running unattended. Tur n the power off and do not leav e the machine until it
comes to a complete stop.
30. Remove loose items and unnecessary work pieces f rom the area before starting the machine.
31. Check the workpiece carefully for splits, knots or other obstructions which m ay cause a safety risk
while turning.
32. Adjust the tool support to the proper hei ght and position for the work. Rotate the workpiece by hand to
check clearance with the tool support.
33. Select the appropriate speed for the turning job at hand. Start at low speed and al low the Lathe to
ramp up to operating speed.
34. Never stop a rotating workpiece with your hand.
35. If gluing up a workpiece, always use a high-qual ity glue of the type necessary f or that particular
workpiece.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
- - SAVE THESE INSTRUCTIONS - -