Powermatic operating instructions Specifications 4224 Lathe, Fwd/Rev

SPECIFICATIONS: 4224 Lathe

Distance Between Centers	42"
Swing Over Bed	24"
Spindle Speeds:
Low speed	0-910 RPM
Medium speed	0-2000 RPM
High speed	0-3500 RPM
Rotation	FWD/REV
Motor	3HP, 220V
Lathe Power Requirements	220V, 3PH or 1PH
Spindle Thread Size	1-1/4" x 8 T.P.I.
Head/Tailstock Taper	#2 Morse
Height to center of spindle	44-1/2"
Weight	950 lbs
Tailstock Quill Travel	4-1/2"
3" Faceplate	standard
14" Toolrest	standard
Drive System	Poly V Belt, Inverter Drive
Spindle Lock	standard
Indexer	24 position
Knock Out Rod	standard
Drive Center	standard
Ball Bearing (live) Center	standard
Hole through tail stock spindle	3/8"
Hole through head stock spindle	5/8"
Footprint of stand	65" L x 24" W

NOTE: The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, Powermatic reserves the right to change specifications without notice and without incurring obligations.

7