Powermatic 511 operating instructions Optional Accessories, Replacement Parts, Every six months

Do not use cleaning solvents such as gasoline, turpentine, lacquer thinner, paint thinner, or ammonia, as these are harmful to plastic and some of the insulated parts on the machine. Never use flammable or combustible solvents around tools.

Do not immerse the saw in liquid as this may create risk of injury, electric shock and damage to the saw.

Periodically:
1.	The carriage is designed to move smoothly	Figure 22
	along the guide tubes. If the guide tubes
	become caked with dust, the carriage may not
	slide evenly or become stuck. Occasionally
	clean the guide tubes with a damp cloth and
	apply a dry lubricant such as a spray silicone.
2.	Rotate the motor to horizontal position and
	check the motor oil level at the plug. Figure 22
	shows the location of the oil plug. If low, fill
	with SAE 70 or 80 gear oil to proper level. The
	gear oil should be changed at least once a
	year, or more frequently if the panel saw
	receives heavy use.
Every six months:
1.	Examine the motor brushes, and replace as
	necessary.
2.	Inspect and clean gears, spindles, bearings,
	housing, etc.
3.	Inspect switch, cord, armature, etc.
4.	Test to ensure proper mechanical and
	electrical performance.

Optional Accessories

511-ASA Adjustable Stop Assembly

Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call 1- 800-274-6848, Monday through Friday (see our website for business hours, www.powermatic.com). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

18