Manuals / Powermatic / Power Tools / Biscuit Joiner

Powermatic 60C, 60HH Troubleshooting Operating Problems, Straight cutterhead Replace nicked

Models: 60C 60HH

1 44
Download 44 pages 36.77 Kb
Page 30
Image 30

Troubleshooting – Operating Problems

Trouble

Finished stock is concave on back end.

Finished stock is concave on front end.

Stock has slight bevel after edge jointing.

Chip out.

Fuzzy, rough, or torn grain.

Board thickness does not match depth of cut scale.

Cutterhead slows while operating.

“Chatter” marks on workpiece.

Uneven knife marks on workpiece.

Probable Cause

Remedy

 

 

Knife is higher than outfeed table.

Raise outfeed table until it aligns with

tip of knife. See pages 18-19.

 

 

 

Outfeed table is higher than knife.

Lower outfeed table until it aligns with

tip of knife. See pages 18-19.

 

 

 

Fence not perpendicular to table.

Square up fence with table.

 

 

Cutting against the grain.

Cut with the grain whenever possible.

 

 

Dull knives/knife inserts.

Sharpen or replace knives.

Rotate knife inserts.

 

Feeding workpiece too fast.

Use slower rate of feed.

 

 

Cutting too deeply.

Make shallower cuts.

 

 

Knots, imperfections in wood.

Inspect wood closely for imperfections;

use different stock if necessary.

 

 

 

Wood has high moisture content.

Allow wood to dry or use different stock.

 

 

Dull knives/knife inserts.

Sharpen or replace knives.

Rotate knife inserts.

 

 

 

Knives are cutting against grain.

Cut with the grain.

 

 

Depth of cut scale is incorrect.

Loosen screw and adjust scale

accordingly.

 

 

 

Feeding too quickly, or applying too

Feed more slowly, or apply less

much pressure to workpiece.

pressure to workpiece.

 

 

Excessive depth of cut.

Reduce depth of cut.

 

 

Dull knives/knife inserts.

Sharpen or replace knives.

Rotate knife inserts.

 

 

 

Knives incorrectly set on straight

Set knives properly using provided knife

setting gauge. Check that knife slots

cutterhead.

are clean and free of dust or debris.

 

 

 

Feeding workpiece too fast.

Feed workpiece slowly and

consistently.

 

 

 

 

Straight cutterhead: Replace nicked

Knives are nicked, or out of

knives; align knives properly using

knife-setting gauge. See pages 14-16.

alignment.

Helical cutterhead: Rotate nicked

 

 

inserts. See page 16.

 

 

30

Page 29 Page 31
Page 30
Image 30
Powermatic 60C Troubleshooting Operating Problems, Straight cutterhead Replace nicked, Helical cutterhead Rotate nicked
Page 29 Page 31

60C, 60HH specifications

The Powermatic 60C and 60HH are two exceptional entries in the world of woodworking machinery, specifically designed for woodworkers who demand precision and efficiency in their operations. Both models embody Powermatic's commitment to innovation and performance, catering to the needs of professionals and serious hobbyists alike.

One of the standout features of the Powermatic 60C is its advanced digital readout (DRO) system. This technology provides users with accurate measurements and easy adjustments, ensuring that every cut is made with precision. The system helps eliminate guesswork, allowing woodworkers to focus on their craft without worrying about the accuracy of their settings. The 60C also features a powerful 1.75 HP motor, which is capable of handling even the toughest hardwoods with ease.

On the other hand, the Powermatic 60HH boasts the Helical Cutterhead technology, which offers a significant upgrade over traditional straight knives. The helical design consists of multiple cutting edges that provide a smoother cut and reduce tear-out, resulting in a superior finish. This is especially beneficial when working with figured woods or delicate materials. The 60HH also features a 3 HP motor, providing ample power for demanding applications and ensuring consistent performance even under heavy loads.

Both models are equipped with a rigid and robust cast-iron construction, ensuring stability and reducing vibration during operation. This design enhances the durability of the machines and extends their lifespan, making them a worthwhile investment for any serious woodshop.

The jointer beds are precision-ground and provide excellent support for long workpieces, while the fence is easily adjustable and provides accurate guidance for various operations, such as jointing and planing. The intuitive controls make it easy for users to switch between different functions and settings, enhancing workflow efficiency.

In terms of mobility, both the 60C and 60HH come with sturdy, adjustable legs and can be fitted with mobility kits that allow for easy movement around the workshop. This flexibility is a significant advantage for woodworkers who need to optimize their workspace.

In summary, the Powermatic 60C and 60HH represent the pinnacle of jointer and planer technology. With their innovative features, powerful motors, and user-friendly designs, these machines deliver unparalleled performance, making them invaluable assets in any woodworking shop. Whether you prioritize precise adjustments with the 60C or superior cutting capabilities with the 60HH, both models stand ready to elevate your woodworking projects to new heights.