Powermatic manual PM15 Planer/Molder

PM15 Planer/Molder

The new PM15 from Powermatic is loaded with features that make it a standout. Large 5HP motor gives the unit 15" wide planing capacity and enough power to run double knife sets for molding.

■The stand is fully enclosed and is equipped with integral casters for shop mobility. ■ Two feed speeds, 10 and 20 fpm’s allow you to run quickly for maximum stock removal yet slower speeds yield a fine milled finish on decorative moldings. ■ Opening the hinged top with 4" dust collection port exposes the cutterhead, allowing for fast and easy tooling changes. This machine can use either single molding knives or 3 knife sets, whichever you choose. ■ A long list of available accessories will make this machine a valuable addition to any shop.

FEATURE	BENEFIT
5 HP motor with
15" planing capacity	Handles the biggest jobs
Fully enclosed base cabinet
with integral casters	Allows complete mobility in the shop
Big 271/2" x 151/8" cast iron
table is supported by 4 lead
screws and height is controlled	Offers precise depth of cut
by chain and sprocket	positioning and accuracy
Feed rollers and cutterhead
supported by full cast iron	Positive stock feeding with accuracy
head assembly	and longevity
Hinged top	Easy access to internal portion
	of machine for fast blade changing
Machine uses single or three
piece molding knives	Wide selection of profiles available
2 feed speeds –10/20 fpm	Allows for fast stock removal as well
	as fine finish work
Dust collection port included	For clean work area and improved finish
Easy to read depth of cut scale
with large handwheel	Fast and accurate set-up

Full cast iron head construction with hinged top allows for fast tooling changes and adjustments.

2-speed oil bath gearbox transmits full power to the feed rollers and facilitates fast speed changes.

Accessory bed board and guide set (PN# 2253082) for precise alignment and support of workpiece while molding.

The Gold Standard Since 1921.

WMH TOOL GROUP