Installation

Zero-U Mounting

Use the following procedure to install the UPS in a zero-U rack configuration:

1.Place the UPS on a flat, stable surface with the front of the UPS facing toward you.

2.Attach four mounting brackets to the UPS as shown Figure 9.

Secure the short end of the mounting bracket to the UPS using two of the supplied M3￿l 6 screws.

3.Adjust the sides of the rack to fit the UPS and brackets (within 22.54–22.78”or 56.35–56.95 cm).

4.Secure the UPS to the side of the rack cabinet using one

M6￿l 10 screw and one clip nut in each mounting bracket.

Powerware® 5115 Rack-Mount User’s Guide : 164201449 Rev A www.powerware.com

25