AMPLIFIER STATUS LEDS
The LEDs provide the following indications:
1. Power - This LED illuminates RED when the amplifier power is
turned on with the remote input (output muted). After a short time
delay this LED will tur n GREEN (amplifier ready).
2. Clip Output - This LED illuminates RED on the peaks of the
output signal when the peaks are too high. This clipping causes
audible distortion in the speakers.
3. Short - This LED illuminates RED on a short condition. The
amplifier will tur n off and tr y to tur n back on.
4.Thermal - This LED illuminates RED on a thermal condition. The
amplifier will tur n off and tur n back on in a minute or so.
Note: Read the AP-IV Protection Circuit section for additional
information regarding Shor t and Thermal protection.
POWER CLIP OUT
SHORT PROTECT THERMAL PROTECT
1 2
3 4
6