Precision Power PC4200 owner manual 6600, SUB Gain

ENDPLATE DIAGRAM

6600

1. FRONT GAIN

Use this control to match the output level of the head unit to the front channel of the amplifier (see page 18).

2. REAR GAIN

Use this control to match the output level of the head unit to the rear channel of the amplifier (see page 18).

3. SUB GAIN

Use this control to match the output level of the head unit to the sub channel of the amplifier (see page 18).

4.COOLING VENTS (see page 18).

5.SPEAKER/REMOTE CONNECTOR

After connecting remote and speaker wires, plug in the PowerLock connectors here with the screws facing up (see pages 7-9).

1 2 3 4 5

FRONT REAR	SUB		FRONT	REAR	SUB WOOFER
			L - L + R +	R - L - L + R + R -	L - L + R E M R + R -
GAIN GAIN	GAIN
Q SELECT 4/2	1	2	XOVER FREQ.		FRONT INPUTS
					L / R
			FRONT	REAR

COMBINE								REAR INPUTS
			QBASS			-12dB		L / R
6	7	8	9	10	11	12	13	14

6. COMBINE

Push this switch in to connect the rear channels to the front inputs (see page 18).

7. Q SELECT 4/2

Push this button in for a Q setting of 4 and out for a setting of 2 (see page 15).

8. QBASS 1
Use this switch with the QBASS 2 to program the QBASS PLUS™	circuit. (see page 15).
9. QBASS 2
Use this switch with the QBASS 1 to program the QBASS PLUS™	circuit. (see page 15).
10. FRONT XOVER FREQ.

Use this control to adjust the front crossover frequency from 20Hz to 5kHz (see page 16).

11. REAR XOVER FREQ.

Use this control to adjust the rear crossover frequency from 20Hz to 5kHz (see page 16).

12. -12dB

For use with high level inputs (4V up to 12V). Push this switch in to attenuate the input by 12dB (see page 14).

13. FRONT INPUTS

Plug in the front RCA leads from your head unit here (see page 14).

14. REAR INPUTS

Plug in the rear RCA leads from your head unit here (see page 14).

13

BACK TO CONTENTS