Precisionaire manual Alpha 95 Component Chart

ALPHA 95 COMPONENT CHART

0 - 00J - W - 08 - 03 - IU - 12 - 00 - GG - F

Hardware

0 = None

T = Extractor Clips

Efficiency

00J = 95% DOP

Capacity/Pack Style

C = Separator

D = 4 inch Pureform

F = 8 inch Pureform

W = 11 inch Pureform

Frame Material

02 = 16 GA 409 Stainless

03 = 16 GA 304 Stainless

04 = 3/4 in. FIRE RETARDANT PLYWOOD

05 = FABRICATED ALUMINUM

07 = 3/4 in. FIRE RETARDANT PARTICLE BOARD

08 = 16 GA. GALVANNEAL

11 = 3/4 in. NON FIRE RETARDANT PARTICLE BOARD

16 or 17 = CORROSION-RESISTANT

24 GA. STEEL

Frame Style

00 = BOX

01 = SINGLE HEADER (13/16”)

02 = DOUBLE HEADER (13/16”)

03 = DOUBLE TURNED FLANGE

05 = 3/4 IN. DEEP CHANNEL GEL SEAL

08 = DOUBLE-TURNED FLANGE, ONE SIDE

Sealant Material

IU = URETHANE

IH = HOT MELT

Gasket material		Gasket location
0	= NONE	0	= NONE
1	= NEOPRENE	1	= UPSTREAM
5	= BLUE JEL	2	= DOWNSTREAM
		3	= BOTH SIDES

Filter Depth

D = 5-7/8”

F = 11-1/2”

Filter Face Size (HxW)

B = 8” N = 30” R = 60”

C = 12” P= 36” S = 72”

E = 18” H = 42” U = 11-3/8”

G = 24” Q = 48” Y = 23-3/8”

Odd Size Designator

Odd size designators are anAlpha Numeric description. The first two digits specify the height whole number with an alpha designator specifying the height fraction. The second two digitsspecifythewidthwholenumberwithanalphadesignator specifying the width fraction. And the last alpha designator specifies the depth. If the height or width is less than 10 inches, use a 0 in front of the dimension.

A = 0”	F = 5/16”	L= 5/8”
B = 1-1/16” G = 3/8”		M = 11/16”
C = 1/8”	H = 7/16”	N = 3/4”
D = 3/16” J = 1/2”		P = 13/16”
E = 1/4”	K = 9/16”	Q = 7/8”
		R = 15/16”

Faceguard Material		Faceguard Location
0 = NONE		0	= NONE
1	= GALVANIZED 4X4 MESH	1	= UPSTREAM
G = ALUMINIZED EXPANDED METAL		2	= DOWNSTREAM
2	= 17GA. SS 4X4 MESH
5	= 22 GA. SS 4X4 MESH

Frame: Alpha 95 filters are available in a variety of wood and metal frame materials such as particle board, plywood, galvanized steel and stainless steel. Alpha 95 filters are also available in 24 gauge corrosion resistant steel in single or double headers for installation in side access or plenum applications.

Seal: The standard gasket seal is 0.75” x 0.25” neoprene for installation on either the upstream, downstream or both sides of the filter. The standard Fluid Seal is Flanders Blu-Jel®Seal which is a two-part silicone material suitable for temperatures up to 390°F.

Faceguards: Faceguards are used to protect the filter media from mechanical damage. The typical faceguard material is expanded aluminized steel. Galvanized 4 x 4 mesh welded wire and Type 304 stainless steel faceguards are also available.

UL: Alpha 95 filters are either UL900 Class 1 or Class 2 listed depending on materials of construction.

Banks: Alpha Frames are designed for Alpha 95 filters in built-up filter banks. Each filter is secured in the frame with four bolt-type fasteners that either compress the gasket or press the knife edge into the gel in the filter channel to maintain a leak-tight seal. Surelock B or C-3 gasket seal and Surelock C-4 for Blu Jel HEPA Filter Housings are recommended for side-access applications. The filters are sealed in place with either spring-loaded swing arm assem- blies or a locking mechanism. The swing arm assemblies or locking mechanism either compress the gasket or press the knife edge into the gel in the filter channel to maintain a leak-tight seal.

Flanders Filters ~ Foremost in Air Filtration

Toll Free: 1-800-637-2803

3