Construction Details
Notes:
1.Standard construction is 14 ga. galvanized steel housing and doors leak tight to +/- 3.0 in. w.g.
2.Maximum operating temperature for standard
Guide Specifications |
|
| ||
1.0 HEPA/ULPA Filter Housings | ||||
1.1 Side access HEPA filter housings shall be | filled channel mates with the internal housing knife | |||
edge sealing flange. The same mechanism shall | ||||
also pull the filter away from the sealing flange | ||||
1.2 Units shall be | ||||
when changing filters. |
| |||
flanges for duct connections on the air entering |
| |||
2.4 The filter locking mechanism for the gasket seal | ||||
and air leaving sides. | ||||
model | housing shall be a 300 | Series stainless | ||
1.3 Housings shall be suitable for operation at +/- 3.0 | ||||
steel | and brass device. The | mechanism shall | ||
in. w.g. internal pressure. | ||||
press the gasketed filter against the housing’s | ||||
| ||||
2.0 Construction | sealing surface by means of a mechanical bolt and | |||
thrust assembly that is manually operated using a | ||||
2.1 Housings shall be made of galvanized or stainless | ||||
standard 3/4 inch socket or wrench. | ||||
steel with 11 ga. corner posts. Joints shall be inter- |
|
|
| |
mittently welded and sealed with silicone. | 3.0 Features |
| ||
2.2 Tracks for prefilters shall be fabricated from the | 3.1 Model numbers and capacities shall be as speci- | |||
same material as the housing. | fied and/or shown on the drawings. | |||
2.3 The filter locking mechanism for the gel seal | 3.2 Provide options as specified. |
| ||
model shall be a 300 Series stainless steel |
|
|
| |
|
|
|
|
®
Flanders Filters, Inc.
531 Flanders Filter Road Washington, NC 27889
Phone: (252)
Toll Free: (800)
Fax: (252)
REPRESENTED BY:
Website: www.flanderscorp.com