Application Guidelines
PrecisionCell II filters should be selected for | PrecisionCell II M and MSH | ||||||||||
new installations with 24” H x 24” W and 24” | |||||||||||
H x 12” W face sizes. These are the most |
| Component Chart | |||||||||
widely used and stocked sizes. This allows | 88655. 04 20 24 MSH D | ||||||||||
for 12” increments in height and width of the | |||||||||||
filter bank and insures that replacement car- |
|
|
|
|
|
|
|
|
|
|
|
Efficiency Series |
|
|
|
|
|
|
| ||||
tridges will be readily available. |
|
|
|
|
|
|
| ||||
| Frame Style |
| |||||||||
PrecisionCell II filters should be installed with | 89655. - |
|
|
|
|
| |||||
|
|
|
| MSH - Metal |
| ||||||
88655. - |
|
|
|
|
| ||||||
the pleats vertical wherever possible. It is |
|
|
|
|
| ||||||
86655. - |
|
|
|
|
| ||||||
permissible to install 24” H x 12” W face size |
|
|
|
| Single Header |
| |||||
Nominal Depth |
|
|
|
|
|
| |||||
filters with pleats horizontal if necessary to |
|
|
|
|
|
|
|
|
| ||
04 - 3.75” Deep |
|
|
|
|
|
| |||||
meet the size requirements of the filter bank. |
|
| Gasket Location | ||||||||
Nominal Width |
|
|
|
|
| ||||||
HEPA Prefilters |
|
|
|
| D - Downstream | ||||||
|
|
| |||||||||
20 - |
| U - Upstream | |||||||||
PrecisionCell II filters are ideal as prefilters | Nominal Height |
|
| V - One Vertical Side | |||||||
|
| ||||||||||
24 - |
|
|
|
|
| ||||||
for Alpha Cell HEPA filters. Their light weight |
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
and 4” depth make them an excellent choice
for installation in the optional Prefilter Frame Assembly for the Alpha Cell HEPA Filter Holding Frame or in Surelock Side Access HEPA Housings.
Specify the Surelock housing with an optional 4” wide prefilter track for the PrecisionCell II filters, in lieu of the 2” wide prefilter track for pleated panel filters. We recommend the selection of
Guide Specifications
1.0 General | 2.3 The filter pack shall be enclosed and sealed with- | ||||
1.1 | Medium and high efficiency extended surface |
| in a |
| |
|
|
| |||
| filters shall be PrecisionCell II (M) (MHS) mini- | 2.4 | PrecisionCell II MSH filters shall have a single | ||
| pleat panel filters as manufactured by Flanders |
| 13/16” diameter header on the air entering side. | ||
| Precisionaire. | 3.0 Performance |
| ||
|
|
| |||
1.2 | Filter sizes, efficiencies and capacities shall be | 3.1 | Initial and final resistances shall not exceed | the | |
| as scheduled on the drawings. | ||||
|
| scheduled values. |
| ||
|
|
|
| ||
1.3 | Filters shall be UL 900 Class 2 listed. | 3.2 | Media area must equal or exceed that of the | ||
|
| ||||
2.0 Filter Construction |
| specified filter |
| ||
3.3 | The average efficiency shall be as determined | ||||
2.1 | The filter pack shall be constructed of | ||||
| by ASHRAE Standard 52.1 and 52.2 | test | |||
|
|
|
microfine fiberglass media containing a water | methods. | |
repellent binder formed into closely spaced pleats | ||
3.4 The manufacturer shall guarantee performance | ||
held in position by adhesive bead separators. | ||
as stated in the literature within tolerances as | ||
| ||
| outlined in Section 7.4 of ARI Standard 850. |
Flanders PrecisionAire
Foremost in Air Filtration
Toll FreeREPRESENTED BY:
4