Precor CW34871-101

Contents

Main Experience Strength C-Line Abdominal Machine Weight Weight Stack Working Area Machine Dimensions Page Page Important Safety Guidelines for Owners Important Safety Information for Users Precor recommends posting a copy of the near the equipment in a prominent location. Safety Approval Important Safety Information for Users Table of Contents Before You Begin Recommended Tools Shroud Removal Obtaining Service Daily Inspection Clean Upholstery Inspect Pads for Wear Clean and Inspect Frames Inspect Cables and End Connections Obtaining Service Check Warning and Instructional Labels Experience Strength C-Line Owners Manual: Daily Inspection Warning Figure 6: A version of this warning label appears on the equipment frame Weekly Inspection Condition and Deep Clean Upholstery Clean and Lubricate Cable Rod Ends Clean and Lubricate Guide Rods Shroud Removal Inspect Cables and End Connections Be careful with any lubricant spray; it can stain carpet and clothing. Inspect Cables, Connections, and Tension Inspect Pulleys Inspect Weight Stack and Selector Pin Inspect and Lubricate Bearings and Bushings Be careful when using the spray lubricant; it can stain carpet and clothing. Check and Lubricate Seat Adjustment Monthly Inspection Inspect Frames and Movement Arms Important Safety Guidelines for Owners Lubricate Pop Pins Inspect All Fasteners Annual Maintenance Weight Stack Annual Maintenance Inspect and Lubricate Pop Pins Experience Strength C-Line Owners Manual: Commercial Strength Equipment Limited Warranty Commercial Strength Equipment Limited Warranty Limited Warranty. Warranty Periods and Coverage: Conditions and Restrictions. Experience Strength C-Line Owners Manual: Commercial Strength Equipment Limited Warranty Disclaimer and Release. Exclusive Remedies. EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES. Page Page Page Page Page Table of Contents Getting Started Open the Box Required Tools Attach the Feet and Foot Covers To Attach the Adjustable Foot: To Attach the Foot Covers: To Adjust the Stability Foot: Attach the Bottle Holder/Accessory Tray To Attach the Bottle Holder/Accessory Tray to the Weight Tower Frame: Assemble the Shroud Before Beginning the Assembly To Install the Pulley Cover: To Install the Front Shroud: To Install the Covers Below the Front Shroud: Page To Install the Upper and Lower Back Shroud: To Install the Top Cover: To Remove the Nameplate Protective Film: Disassemble the Equipment To Detach the Cable: To Separate the Weight Tower from the Exercise Station: To Reroute the Cable During Reassembly: y y y