Precor P30 manual Upright support insertion

22 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes

7.Using a piece of tape or a plastic tie, bind together the upper ends of all cables.

8.While your assistant holds the upright support in place over the body assembly, thread the cables upward through the support. When you are finished, use a piece of tape to secure the upper connectors of the cables at the top of the support.

9.Slide the upright support into position so that its screw holes line up with the corresponding holes on the body assembly, as shown in the following illustration.

Note: If the support is positioned correctly, it rests on a metal tab in the upright support channel.

Figure 5: Upright support insertion

Important: In the following step, be extremely careful not to trap or pinch any of the cables between the mounting screws and their seats.