18 Product Owner's Manual
Setting a Pause Time Limit
You can limit how long a user can pause while exercising on
the equipment by entering a time between 1 and 120 seconds
(two minutes). For example, if you set a pause time limit of
60 seconds, the display automatically resets to the Precor
banner if no movement is detected and no key press occurs
for one minute.
Important: The optional power adapter must be connected on
self-powered equipment to establish a definitive pause time limit.
If the optional power adapter is not attached and the rate of
motion drops below the minimum requirements, the equipment
begins its 30-second shutdown, effectively eliminating pause
mode.
To set a maximum pause time:
1. At the SET MAX PAUSE TIME prompt, press OK.
Use the navigational arrow keys to select a time limit
between 1 and 120 seconds (two minutes).
2. Press OK to accept the displayed setting and move to the
next feature.
Setting a Cool Down Time Limit
Use this setting to select the maximum amount of time the
machine will remain in the cool down mode. Cool down time
is the period of time following the completion of a program
were the user exercises at a reduced work rate.
To set a cool down time:
1. At the SET COOL DOWN TIME prompt, press OK.
2. Use the navigational arrow keys to display the available
time limits and choose a time between 0 and 5 minutes.
Note: The default setting is 5 minutes.
3. Press OK to accept the displayed setting and move to the
next feature.