Precor S3.23 manual Install the weights

S3.23 Assembly and Maintenance Guide

D.Have your assistant slide the Top Weight Assembly and Selector Stem off the Guide Rods. Ask your assistant to hold the Top Weight Assembly away from the Guide Rods while you install the weights.

E.Add the ten 10-lb weights and the ten shorter- length 5-lb weights. Note that the curve on the weight plate faces inside. Hold your finger over the plastic bushing in each weight to prevent the bushing from popping out.

CAUTION: The weights are heavy! Handle the weights carefully so as not to drop them or injure yourself. Pick up and place one weight at a time on the Guide Rods. Do not angle the Guide Rods to such a degree that they dislodge the Base Bumpers and come out of the Base Frame.

Guide Rod	Ask your assistant to hold the Top Cap Weight
Bracket and
Bumpers	E Assembly away from the Guide Rods while you
	install the weights.
Top Weight
Assembly
Selector Stem
Guide Rod
D
Guide Rods
	Base
	Frame
	Base Bumpers

1

2

3

4

5

6

Step 2. Assemble Weight Stack, Continued

page 10