Assemble the Frame | Precor S3.25 guide

S3.25 Leg Press Option Assembly Instructions

3. Assemble the Frame

A.With someone helping you, lift the Seat Frame upright. Have your assistant hold it in place while you attach the Cross Brace in the next step.

B.Attach the Cross Brace to the holes found at the front of the Seat Frame using

two 3-inch bolts four washers two locknuts Wrench tighten.

Important: A label on the Seat Frame indicates the mounting holes you must use to attach the Cross Brace to the S3.25 Leg Press Option.

C.Slide the Backpad Support into the Seat Frame, locking it in place with the Pop Pin.

Backpad

Support

Backpad

Support

Pop Pin

C

Have an assistant hold A the Seat Frame stable

and upright while you attach the Cross Brace

Seat Frame

	Cross Brace
	Label indicates mounting	2 - 3" bolts
	Label indicates mounting	B 4 - washers
	location for the S3.25	B 4 - washers
	location for the S3.25	2 - locknuts
		2 - locknuts

1

2

3

4

5

6

Step 3. Assemble the Frame

page 9

Image 9

Precor S3.25 manual Assemble the Frame

Contents

S3.25 Obtaining Service Important Safety Instructions Table of Contents 1Before You Begin Before You BeginUnpacking the Equipment Installation Requirements PreparationsRequired Tools AssemblyInstructions Assembly InstructionsProfessional installers are highly recommended Remove the Shroud Attach the Cross Brace to the S3.25 Assemble the Frame Footrest Assemble the Seat Pads Route the Cable Assemble the Cable and Pulleys New Surgical Tube Replace the Shroud Stretch the Cable Adjustments Rotate the Cam Washer Adjust the Rubber Bumper on the Leg Press Option Thank You and Welcome to Precor Purchased From Date Product Serial Purchase NumberPlease indicate the type of product purchased Gender Marital status Age Annual household income Precor Residential Equipment Limited Warranty S3.25 Leg Press Option Specifications