Premier Mounts APP-2446Installation, PBC Ceiling Installation, Page, Installation Manual

APP-2446 Adapter

APP-2446 Installation

1.Determine your mounting configuration. Follow the provided instructions to attach the ceiling accessory that will be used.

2.Thread the APP-2446 Adapter into the ceiling accessory.

3.Turn the APP-2446 Adapter five (5) complete turns before releasing the APP-2446 Adapter.

3.Once the APP-2446 Adapter is attached, tighten all mounting hardware.

4.Use the set screw (supplied) to secure the connecting pipe.

5.Once the APP-2446 Adapter has been attached to the ceiling accessory, you may install the projector/display mount. Be sure to follow the installation instructions that are supplied with the projector/display mount.

PBC Ceiling Installation

MAKE SURE TO HOLD THE PLASMA DISPLAY OR PROJECTOR SECURELY OR REMOVE IT FROM THE MOUNT TO MAKE THE HEIGHT ADJUSTMENT PRIOR TO LOOSENING THE ADJUSTMENT SCREWS. DO NOT REMOVE THE SCREWS COMPLETELY FROM THE EXTENSION ALL AT ONCE. LOOSEN, REMOVE, ADJUST THEN RE-TIGHTEN THE SCREWS. FAILURE TO DO SO COULD RESULT IN INJURY AND OR DAMAGE TO THE PLASMA DISPLAY OR PROJECTOR. IF POSSIBLE, ALL ADJUSTMENTS SHOULD BE MADE PRIOR TO ATTACHING THE DISPLAY OR PROJECTOR.

Ceiling Structure

(See WARNING:)

PBC Ceiling Adapter

Suitable Hardware

Relocate Adjustment Screws

Cable Access

Opening

Adjustment Screws

Relocate Adjustment

Screws

Lower Tube

PBC Housing or any Premier Mounts compatible adapter

1.Secure the PBC ceiling plate or any 1-½ (NPT) pipe-receiving adapter to the ceiling (see warning).

2.Use suitable hardware (commercially available) depending on your installation environment to secure the four (4) mounting points found on the ceiling plate to the ceiling structure.

3.Thread the PBC or any of Premier Mounts compatible adapters to the bottom of the APP-2446 and secure it with the Allen Key (supplied with the PBC).

4.Refer to the PBC installation instructions to complete the installation.

Page - 4 - Installation Manual