INSTALLATION GUIDE: XUT-2637

Victory Tilt Screen Wall Mounting System

The Victory Tilt Screen Wall Mounting System is designed for secure installation of flat screen displays up to 42”.

Warning Statements

WARNING: THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST A MINIMUM WEIGHT OF 250 LBS. IF NOT, THE WALL MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH. DO NOT PLACE A UNIT WEIGHING MORE THAN 125LBS. ON THIS MOUNT

WARNING: SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY.

WARNING: PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.

A secure structure must support the weight, or load, of the display. When mounting to a wall that contains wooden studs, dead center of the wooden stud must be confirmed prior to installation.

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the display and/or damage to the mounting

Included Hardware

Griplates

3” Lag Bolts

 

(Qty 8)

(Qty 6)

 

Flat Washers (Qty 6)

NOTE:

To correctly determine your hardware,

 

please refer to the hardware list below.

 

 

Tool List

Phillips Head Screw Driver Electronic Stud Finder ½” Socket and Wrench Portable Drill

Masonry Bit for Concrete Installation 1/4” Drill Bit for Wood Installations Level (Commercially Available)

surface.

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the display and could increase the risk of fire.

At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the display.

Recommended mounting surfaces: wooden studs and solid-flat concrete. If the mount is to be installed on any surface other than wooden studs, use suitable hardware (which is commercially available).

Contact Victory Mounts with any technical / installation questions.

9531-015-112-06

Wood Stud Mounting

1.For secure wood stud mounting, the wall plate must be mounted to two studs at least 16” apart.

2.Use a high-quality electronic stud finder (commercially available) to locate two adjacent studs and mark their locations with a pencil.

3.With the help of an assistant, use a level (commercially available) and position the wall plate against the wall in the desired mounting location.

4.Mark the right (upper and lower) and the left (upper and lower), positions of the small horizontal slots that are in alignment with the studs.

5.You should mark four positions total.

6.Next, pre-drill a 1/4” hole in the wall stud at each marked location.

Lag Bolt and Washer

Continued on back page

Page 1 Page 2
Page 1
Image 1
Premier Mounts XUT-2637 installation instructions Victory Tilt Screen Wall Mounting System, Included Hardware
Page 1 Page 2

XUT-2637 specifications

Premier Mounts XUT-2637 is a versatile and innovative mount designed to enhance the installation and functionality of your digital displays. This exceptional model provides a seamless solution for various environments, whether in commercial spaces, educational institutions, or public venues. Its robust design and advanced features ensure that your displays are secure while maintaining an aesthetically pleasing appearance.

One of the primary features of the XUT-2637 is its universal compatibility, allowing it to accommodate a wide range of display sizes and brands. This flexibility makes it an ideal choice for any installation scenario. Additionally, it can support displays weighing up to 175 pounds, ensuring a sturdy and reliable setup. Its adaptability extends to VESA mounting patterns, covering many options that are essential for modern screen configurations.

The XUT-2637 is designed with ease of installation in mind. It includes a complete hardware kit that enables straightforward assembly and setup. The mount features a tilt function, allowing users to adjust the angle of the display for optimal viewing experience while reducing glare. This feature is especially beneficial in environments with varying ambient light conditions.

Another impressive aspect of the Premier Mounts XUT-2637 is its cable management system. This built-in solution neatly organizes and conceals cables, promoting a tidy installation that enhances the overall look of your display area. By avoiding cable clutter, users can maintain a professional and polished appearance in any setting.

Durability is a hallmark of the XUT-2637. Constructed from high-quality materials, this mount is engineered to withstand the rigors of daily use. Its finish not only adds to the aesthetic appeal but also provides resistance to scratches and wear, ensuring it remains visually appealing over time.

The mount also offers various mounting options, including a wall mount for easy installation in both landscape and portrait orientations. This flexibility allows for creative display arrangements, enabling users to optimize their visual presentations according to their specific needs.

In summary, the Premier Mounts XUT-2637 combines advanced engineering, versatile compatibility, and user-friendly features to deliver a top-notch mounting solution for digital displays. Whether in a bustling office, dynamic classroom, or engaging public space, this mount enhances functionality and visual appeal, making it an ideal choice for modern display setups.
Top Page Image Contents