Premium Home Creations Amplifier owner manual This Manual is Your Warranty Card

OWNER'S MANUAL E

SEARCH

•Continual pressure on the PREV/FREV key will allow you to search for a passage in reverse direction; continual pressure on the NEXT/FFWD key will allow you to search for a passage in the forward direction.

•The time that you continue to press the key determines the speed of the search: for the first three seconds the output volume is reduced after three seconds the search speed is increased and the sound is muted.

SHUFFLE MODE (SHUFFLE)

•Press the SHUFFLE key before or during Play.

•The SHUFFLE indicator will illuminate and CD will now play each track in a random order.

•Press the SHUFFLE key to return to normal Play mode.

A/B REPEAT (A/B)

•Press the A/B key while in play at the starting point of the passage that you wish to repeat.

•Aª will illuminate.

•Press again the A/B key at the final point of the passage that you wish to repeat.

•AªB will illuminate and the selected passage will continuously repeat.

•Press the A/B key to cancel the A/B mode.

REPEAT (REPEAT)

•Press the REPEAT key before or during Play.

•The REPEAT indicator will illuminate and the disc will be repeated continuously.

•Press the REPEAT key again and the indicator REPEAT 1 will illuminate.

•REPEAT 1 will indicate that the current playing track will be repeated continuously.

•Press the REPEAT key to cancel the REPEAT mode.

TIME INFORMATION (TIME)

•Press the TIME key during Play if you wish to know the elapsed time since the beginning of the disc. (TOTAL TIME).

•Press the TIME key again if you wish to know the remaining time on the disc. (TOTAL REM TIME).

•Press the TIME key again if you wish to know the remaining time of the playing track (REM TIME).

•(TRACK TIME). is the default information mode.

•Press the TIME key again if you wish to return to the default mode which is the elapsed time of the playing track ( TRACK TIME ).

PROGRAMMING (PROG)

You may program a maximum of 20 tracks at any time.

•Select the number of the track that you desire to store by using the numeric keypad (0-9) or by using the PREV/FREV or NEXT/FFWD keys.

•Store your choice by pressing the PROG key.

•Each time you store a track, the display will show the number of stored tracks and the total time of this selection.

•Press the PLAY key to start playing your selection.

•When the selection has finished, press the STOP key again to clear the selection.

DIGITAL OUTPUT (MODE)

In Stop mode only, you can activate or deactivate the Digital output by pressing two times the MODE key. This is necessary if you wish to use a separate Digital to Analog converter or if you wish to make a Digital recording.

•ON dOBM is displayed when the output is activated.

•OF dOBM iis displayed when the output is deactivated. This will be shown on the display for 2 seconds.

HEADPHONE LEVEL (MODE)

When headphones are connected, the MODE key serves as the headphone volume control. A single depression of the MODE key steps the volume up. Continuous depression of the MODE key brings the volume down.

Both set up of the Digital Out status as well as Headphone level are retained as long as the unit is powered. Use the Stand-by function if your do not want to loose this parameters.

TECHNICAL CARACTERISTICS

Typical Audio Performance
Frequency range (0 / - 0.5dB) :	....................................... 2Hz - 20Kz
Linearity on - 90 dB :	< 1.5 dB
Signal-to-noise ratio :	< - 96 dB at 1 kHz
Channel separation :	> 100 dB at 1 kHz
D/A conversion :	20 bits
Audio output level :	2Vrms / 0 dB
Output impedance :	200Ω
Audio output level XLR :	+6 dB
Output impedance XLR :	200Ω
Power supply.
Power consumption :	11 W
Fuse	220V - T 160mA / 250V (Slow blow)
	120V - T 315mA / 130V (Slow blow)
Dimensions : w x d x h in mm	430 x 265 x 70
Weight :	4.0 kg

THIS MANUAL IS YOUR WARRANTY CARD

Micromega S.A. warrant the product contained herein to be guaranteed against manufacturing faults and defects for a period of 2 years ( 1 year for the CD mechanism ) from the purchasing date.

For warranty work the unit must be returned to the vendor in its original packing with a copy of the original sales receipt as well as this manual.

The warranty will be invalid should the unit be :

-Damaged by accident.

-Damaged by negligence.

-Damaged by miss - use.

-Damaged by miss - installation.

-Damaged by tempering by a non - appointed agent.

-Damaged by transit.

You should contact your vendor in your country of purchase with regards to specific local warranty details.

UNIT SERIAL N° UPGRADE N°

7