Presonus Audio electronic ADl 600 TECHNICAL , 4.2 TECHNICAL SPECIFICATIONS

TECHNICAL

Input Impedance

Microphone .............................................Selectable, 150/300/900/1500 Ohm

Balanced Line ......................................................................................2KOhm

Instrument ........................................................................................100KOhm

Maximum Input Level

Microphone (1500Ohm, +20dB Pad out) ...............................................+5dBu

Microphone (1500Ohm, +20dB Pad in) ...............................................+25dBu

Balanced Line ......................................................................................+30dBu

Instrument ............................................................................................+30dBu

Gain Range

Microphone (1500Ohm, +20dB Pad out) ................................... 18dB to 72dB

Balanced Line ...........................................................................-12dB to 40dB

Instrument ...................................................................................-5dB to 42dB

Noise Floor (all inputs, minimum gain) ............................-95dBu (A-weighted)

Microphone Equivalent Input Noise (EIN) .....................-125dBu (A-weighted)

Frequency Response ..................................................10Hz to 45KHz +/- 1dB

Maximum Output Level ...........................................+23dBu (@ 0.5%THD+N)

Output Impedance ............................................................................. 600 Ohm

Tube Complement (per channel) ........................................1-12AT7A, 2-6922

General

Power (Factory Configured) .................................115 or 230 VAC / 100Watts

Dimensions ................................................... 3.5" (H) X 17.0" (D) X 19.0" (W)

Weight ...................................................................................................... 28 lb

As a commitment to constant improvement, PreSonus Audio Electronics,

Inc. reserves the right to change any specification stated herein at any

time in the future without notification.