A short supply cord is provided to reduce the hazards resulting from becoming entangled in or tripping over a longer cord. An extension cord may be used if care is exercised in its use. If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating of the tea kettle. The extension cord, if used, should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over accidently.

Whistle Performance: If you wish to hear the whistle, boil 2 to 4 cups of water each time you use the tea kettle. As the volume of the water in the tea kettle increases, the sound level of the whistle intensifies, When using less than 2 cups of water in the tea kettle, the whistle will function, however, it will be very faint sounding. Once the water level drops to the 1 cup level, the sound of the whistle will disappear completely.

How To Use

Always be sure the tea kettle is unplugged from the wall outlet before filling with water.

1.Lift the spout lid and tilt back toward the handle. Fill with 2 to 4 cups of water; do not fill above the full mark (Fig. A). Overfilling may result in hot water boiling out the spout. Plug cord into 120 volt AC wall outlet.

2.Use the tea kettle on a dry, level, heat resistant surface, away from countertop edge.

NOTE: Before using the heated water for consumption for the first time, boil one kettle full of water and discard. It may contain some manufacturing oil or residue. Do not use any soap or cleaning compounds in the water.

Handle

Spout

Lid

Full Mark

Spout

 

Fig. A

3.The water will begin to boil in a few minutes and will continue to boil until the cord is disconnected or all the water has evaporated. The whistle will begin to sound as the water begins to boil and will continue until the water drops to the 1 cup level. Do not plug the whistle hole or attempt to change the whistle in any manner as this will result in boiling water being ejected out the spout.

NOTE: Should the tea kettle boil dry or be accidentally plugged in empty, it is protected against damage by its automatic re-setting thermostat that will turn off the heating element. If this occurs, disconnect the cord and allow to cool before refilling with water.

4.Keep hands away from escaping steam and use caution when pouring hot water from the tea kettle.

5.Do not attempt to heat any liquids other than water.

6.Always disconnect cord from wall outlet before pouring, to prevent boiling water from surging out the spout.

7.Empty any unused water while still hot to reduce scale buildup.

NOTE: The inside of this tea kettle is specially coated to prevent discoloration. Mineral content in water varies from place to place and in some areas may still cause discoloration. The discoloration will not affect the taste or quality of the water. Always empty all unused water after each use.

In addition, water with high mineral content may tend to bubble more excessively and possibly boil out the spout. If this occurs, reduce maximum fill by 12 cup, or so water comes to the bottom of the full mark.

Care and Cleaning

1.Under normal use, a deposit of scale may form on the inside of the tea kettle. This scale buildup can be delayed by pouring out old water after each use and then refilling with fresh water when using again. If the tea kettle is used on a daily basis, clean the inside once a month to remove mineral deposits. If the water in your area is quite hard, more frequent cleaning may be necessary.

2.To remove the scale deposit, boil one cup of vinegar and one cup of water in the kettle for five minutes. Unplug and allow to stand for 15 minutes. Empty tea kettle and rinse thoroughly. If mineral buildup is quite severe, repeat cleaning process with fresh vinegar and water. Always rinse thoroughly after cleaning.

3.Never use soap or other cleaning solutions in this kettle.

4.Wipe the exterior of the tea kettle with a soft damp cloth. Do not scour surfaces with steel wool or abrasive cleaners. Never immerse in water or other liquid.

2

Page 2
Image 2
Presto 2703 manual How To Use, Care and Cleaning, Never use soap or other cleaning solutions in this kettle

2703 specifications

Presto 2703 is a versatile and innovative solution designed to enhance various aspects of operational efficiency, particularly in foodservice and hospitality industries. This advanced piece of equipment is specifically engineered to streamline workflows, improve service delivery, and enhance customer satisfaction.

One of the standout features of the Presto 2703 is its user-friendly interface, which allows for quick and easy navigation. The touchscreen display simplifies operations, enabling staff to access necessary functions with minimal training. This is particularly beneficial in fast-paced environments where every second counts.

The Presto 2703 employs cutting-edge technologies to ensure optimal performance. It includes real-time monitoring capabilities that provide insights into operational metrics and performance indicators. This data can help managers make informed decisions, adjust workflows, and identify areas for improvement. Additionally, the device integrates seamlessly with existing systems to provide a cohesive operational framework.

Another key characteristic of the Presto 2703 is its robust build quality, which ensures durability and longevity. Designed to withstand the rigors of daily use, it is equipped to handle various operational stresses while maintaining peak performance. This reliability is essential in settings where equipment downtime can lead to substantial financial loss.

The Presto 2703 is also designed with energy efficiency in mind. Utilizing advanced energy-saving technologies, it minimizes power consumption without compromising on performance. This not only reduces operational costs but also aligns with sustainability goals, making it an eco-friendly choice for businesses.

Further enhancing its appeal, the Presto 2703 offers flexible programming options that allow users to customize settings according to their specific needs. This adaptability makes it suitable for a wide range of applications, from casual dining to high-end restaurants.

Overall, the Presto 2703 stands out with its combination of user-centric design, advanced technology, and durable construction. These attributes make it an invaluable asset for any establishment seeking to improve efficiency, streamline operations, and enhance the overall dining experience. With a focus on innovation and practicality, the Presto 2703 is well-positioned to meet the evolving demands of the foodservice industry.