VI. CARE AND MAINTENANCE

Your Jazzy is a sophisticated power chair. Like any motorized vehicle, it requires routine maintenance. You can perform some of these checks. Others require assistance from an authorized Pride provider. Preventive mainte- nance is very important. If you follow the maintenance checks in this section as scheduled, you can help ensure that your Jazzy gives you years of trouble-free operation. If you have any doubt as to your Jazzy’s care or operation, contact your Pride provider.

CAUTION: Your Jazzy 1103, like most electrical equipment, is susceptible to damage from the elements. Avoid damp areas of any kind. Direct exposure to water or dampness could cause the wheelchair to malfunction electronically and mechanically. Water can cause electrical components to corrode and the frame to rust.

Should your Jazzy 1103 come in contact with water:

1.Dry your Jazzy 1103 as much as possible with a dry towel.

2.Allow your Jazzy 1103 to sit in a warm, dry place for 24 hours to allow unseen water to evaporate.

3.Perform all safety and operational tests before using your Jazzy again.

4.If any inconsistencies are found, take your Jazzy 1103 to an authorized service center.

TEMPERATURE

Some of the parts of your Jazzy 1103 are susceptible to extreme changes in temperature.

λIn extremely cold temperatures the batteries may freeze. The specific temperature at which they freeze de- pends on a number of factors, such as battery charge, usage, and composition of the batteries (e.g., Sealed Lead Acid or Gel Cell).

λTemperatures above 50°C/122°F may cause the Jazzy 1103 to operate at a reduced speed. This is a safety feature built into the controller that helps prevent damage to the motor and other electrical components (see “Thermal Rollback” in III, “Operation”).

GENERAL GUIDELINES

λAvoid knocking or bumping your controller, especially the joystick.

λAvoid prolonged exposure of your Jazzy to extreme conditions such as heat, cold, or moisture.

λKeep the controller clean.

λCheck all connections on the electronics connector housing to ensure that they are all tight and secured properly. Also check the charger harness connector.

λWhen the battery indicator gauge is completely lit, the batteries are fully charged and the controller and electrical system are OK.

λIf one red bar on the battery indicator gauge is blinking slowly, the batteries are low and need to be charged, but the controller and electrical system are OK.

λIf the battery indicator gauge is blinking rapidly, the controller has detected a fault in either its own circuits or in the Jazzy’s circuits. (See III, “Operation”.)

Jazzy 1103

23

Page 22 Page 24
Page 23
Image 23
Pride Mobility owner manual VI. Care and Maintenance, Should your Jazzy 1103 come in contact with water, Temperature
Page 22 Page 24

1103 specifications

Pride Mobility 1103, a flagship mobility scooter model, epitomizes comfort, performance, and reliability for individuals seeking independence in their daily lives. This scooter is designed with advanced technologies and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the key features of the Pride Mobility 1103 is its robust power system. Equipped with a high-performance battery, this scooter boasts a competitive driving range, allowing users to navigate their surroundings without frequent recharges. The powerful dual motors ensure agility and responsiveness, making it easy to handle different terrains, including sidewalks and slight inclines.

The design of the Pride Mobility 1103 emphasizes user comfort. It features an adjustable seat with enhanced cushioning and armrests, providing a pleasant riding experience for extended periods. The flip-back arms further improve accessibility, making it convenient for users to get in and out of the scooter. The swivel seat adds an additional layer of ease, allowing users to face any direction effortlessly.

Safety is another cornerstone of the Pride Mobility 1103. This scooter includes a comprehensive lighting system, with bright front headlights and rear reflectors, ensuring visibility during low-light conditions. Equipped with a safety belt and anti-tip wheels, it promotes stability and confidence when navigating various environments.

In terms of control and navigation, the Pride Mobility 1103 features an intuitive tiller that can be adjusted for optimal positioning. The control panel is designed for ease of use with clear indicators for battery life, speed, and direction. This simplicity allows users to enjoy a seamless driving experience without unnecessary complications.

Durability is paramount in the construction of the Pride Mobility 1103. Built with high-quality materials, it is designed to withstand regular use while maintaining its sleek appearance. The scooter’s sleek, modern design is not only aesthetically pleasing but also functional, with ample storage options available for personal items.

In conclusion, the Pride Mobility 1103 stands out as a versatile mobility scooter that combines powerful performance, comfort, and safety features. This model caters to the diverse needs of users, allowing them to regain their mobility and independence, enhancing their quality of life in the process. Whether used for daily errands or leisurely outings, the Pride Mobility 1103 is engineered to deliver an exceptional driving experience.
Top Page Image Contents