Pride Mobility 1170 XL PLUS owner manual Controller Position, Foot Platform Height Adjustment

V . C O M F O R T A D J U S T M E N T S

Controller Position

The controller can easily slide out away from the armrest, or in toward the armrest. You can also move the controller to the other armrest. See figure 13.

To extend the controller:

1.Flip up the armrest so it is perpendicular to the floor.

2.Loosen the setscrew on the controller bracket. See figure 13.

3.Slide the controller into or out of the armrest to the de- sired position.

To change the controller position:

1.Turn off power to the controller. See VII. “Operation.”

2.Disconnect the controller from the power base.

3.Cut the wire tie(s) that attaches the controller cable to the armrest.

4.Loosen the setscrews. See figure 19.

5.Slide the controller out of the armrest.

6.Loosen the setscrew in the other armrest.

7.Place the controller in the other armrest.

8.Tighten the setscrew to secure the controller.

9.Use a wire tie to secure the controller cable to the armrest.

10.Plug the controller into the power base. See figure 6.

Foot Platform Height Adjustment

The foot platform height is easily adjusted to six different heights.

To raise or lower the foot platform:

1.Use a hex key to remove the mounting hardware from the foot platform. See figure 14.

2.Raise or lower the foot platform to the desired height.

3.Reinstall the mounting hardware into the foot platform.

Foot Platform Angle Adjustment

You can adjust the angle of the foot platform with a hex key.

To adjust the foot platform angle:

1.Locate the setscrew on the underside of the foot platform. See figure 15.

2.Turn the setscrew clockwise to raise the front of the foot platform.

3.Turn the setscrew counterclockwise to lower the front of the foot platform.

CONTROLLER

BRACKET

SETSCREW

Figure 13. Controller Extension

MOUNTING HARDWARE

Figure 14. Foot Platform Height Adjustment

SETSCREW

Figure 15. Foot Platform Angle Adjustment

Jazzy 1170 XL Plus www.pridemobility.com 23