Pride Mobility 1170XL Plus 2VHD, 1170XL Plus 3VHD manual Freewheel Levers

I I I . Y O U R P O W E R C H A I R

Freewheel Levers

For your convenience, your power chair is equipped with two freewheel levers. See figures 8 and 9. These levers allow you to disengage the drive motors and maneuver the chair manually.

WARNING! Do not use your power chair while the drive motors are disengaged! Do not disengage the drive motors when your power chair is on an incline, as the unit could roll on its own. Only engage the freewheel mode when on a level surface.

WARNING! It is important to remember that when your power chair is in freewheel mode, the braking system is disengaged.

To engage or disengage the freewheel feature:

1.Turn the freewheel levers outward to disengage the drive motors. See figure 8.

2.Turn the freewheel levers inward to engage the drive motors. See figure 9.

If a lever is difficult to move in either direction, rock your power chair back and forth slightly. The lever should then move to the desired position.

WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.

MANUALFREEWHEELLEVERS

Figure 8. Drive Disengaged (Dual Levers)

MANUALFREEWHEELLEVERS

Figure 9. Drive Engaged (Dual Levers)

18 www.pridemobility.com Jazzy 1170 XL Plus Series