Pride Mobility HD, 14 manual Seat Position, To change the position

V . C O M F O R T A D J U S T M E N T S

Seat Position

You can move the seat forward or rearward by changing the extru- sion mounting position.

To change the position:

1.Turn off the power to the controller.

2.Make sure the power chair is in drive mode.

3.Unplug the controller connector(s) from the power base.

4.Remove the seat from the power base.

5.Remove both extrusions from the bottom of the seat.

6.Reposition the extrusions on a different set of mounting holes. You must move both extrusions the same number of holes either forward or backwards. See figure 9.

WARNING! Changing the position of the seat can cause instability. Do not change your seating configuration without first contacting Pride Mobility Products or your authorized Pride Provider.

WARNING! Failure to properly adjust the programming or center of gravity of the power chair to meet the individual needs of the client can result in personal injury and/or equipment damage.

7.Fasten the extrusions back onto the bottom of the seat.

8.Reinstall the seat.

9.Reconnect the controller to the power base.

Seat Depth	270-400 lbs.	401-450 lbs.
	(122-181 kg)	(182-204 kg)
18 in. deep	Allowed	Not Allowed
20 in. deep	Allowed	Allowed
22 in. deep	Allowed	Allowed
24 in. deep	Allowed	Allowed

NOTE: Pride Mobility Products offers a wide variety of seating options available on power chairs in the Heavy Duty category, which covers a wide range of user weights from 270-450 lbs. (122- 204 kg). RESNA testing to determine seat stability for the range of seat depths across the user weight range in the Heavy Duty category has been performed. Refer to the chart above for Pride’s recommendations for allowable seat depths by user weight range.

WARNING! Maximum weight capacity is reduced to 400 lbs. (181 kg) on 18-in. deep seat depth configurations.

SEAT MOUNTING HOLES

WARNING! The center of gravity of your power chair was factory set to a position that meets the needs of the demographic majority of users. Your authorized Pride Provider has evaluated your power chair and made any necessary adjustments to

suit your specific requirements. Adjusting the seat position can cause instability. Do not change your seating configuration without first contacting Pride Mobility

Products or your authorized Pride Provider.

Figure 9. Seat Position Adjustment

14 www.pridemobility.com Jazzy Elite Series