Pride Mobility INFMANU4206 manual I . D I S a S S E M B L Y a N D a S S E M B L Y, Disassembly

V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into				several	FRONT SECTION	SEAT
pieces: the seat, the front section, the rear section,
the battery shroud, the basket, and the batteries.
See figure 21. No tools are required to						REAR SECTION
disassemble or assemble your scooter, but keep
in mind that the disassembled sections of the
scooter take up more floor space than the
assembled unit. Always disassemble or assemble
your scooter on a level, dry surface with
sufficient room for you to work and move around
your scooter–about 1.5 meters (5 feet) in all
directions.	Remember	that	some	scooter
components are heavy and you may need					BASKET	BATTERIES
assistance when lifting them.						BATTERY SHROUD

WARNING! Do not lift beyond your physical capability. Ask for assistance when necessary

while disassembling or assembling your scooter.

1.Remove the seat by lifting it straight up and off of the scooter. If you encounter resistance when removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.

2.Gently pull the battery shroud forward and off of the scooter.

3.Disconnect the battery tie-down strap.

4.Unplug both battery harnesses by pulling each harness straight up. See figure 22.

5.Remove the batteries from the battery wells.

6.Disconnect both front-to-rear harnesses. See figure 22.

Figure 21. Scooter Components

BATTERY HARNESS CONNECTIONS

BATTERY TIE-DOWN STRAP

Figure 22. Harness Connections

WARNING! Failure to unplug both battery harnesses prior to separating the front and rear sections could result in permanent damage to the scooter.

Victory Sport www.pridemobility.com 35