V I I I . C O M F O R T A D J U S T M E N T S
POWER SEAT (OPTIONAL)
Your scooter may be equipped with a power seat. The power seat actuator is designed to raise or lower the seat automatically with minimal effort on the part of the operator. See figure 14. The power seat switch is located on the lower tiller just above the charger port.
Operating your power seat:
1.Release the throttle control lever.
2.Ensure your scooter is level and stationary.
3.Set the speed adjustment dial to the slowest setting
4.Toggle “on” the power seat switch that is located on the tiller console.
5.To raise the power seat, place your hands on the handgrips and use your thumb to push the right side of the throttle control lever.
6.Release the throttle control lever when you have attained your desired height.
7.To lower the power seat, place your hands on the handgrips and use your thumb to push the left side of the throttle control lever.
8.Ensure your seat is in the lowest position and release the throttle control lever.
9.Toggle “off” the power seat switch before you attempt to drive your scooter again.
WARNING! The power seat is intended for operation only while your scooter is stationary and on a level surface. Its purpose is to aid you in reaching objects.
Strict adherence to the following safety rules is vital to your safety:
ν
ν
Operate the power seat only on level ground.
Do not attempt to operate the power seat switch with the throttle control lever depressed.
ν
ν
ν
Do not attempt to raise or lower the seat while in motion! Do not operate your scooter with the power seat elevated.
It is recommended that the scooter be driven only with the seat in the lowest position.
Figure 14. Power Seat Actuator
Maxima | www.pridemobility.com | 31 |
