I I . S A F E T Y
LIFTING CAPABILITIES
The Power Tote P-100 Lift System is designed for a maximum lift weight of 100 lbs. (45.35 kg). Under no circumstances should the Power Tote P-100 be made to exceed this weight limit. Subjecting the lift system to the strain of hoisting more than it is designed to lift may cause it to fail, resulting in damage to the wheelchair and/or the lift operator. Refer to the wheelchair owner’s manual for information on the overall weight of the wheelchair before lifting.
WARNING! Adding accessories will increase the weight of your wheelchair. Verify with your authorized Pride Provider that the total weight of your wheelchair, including additions, does not exceed the maximum weight allowance.
INSTALLATION
Your Power Tote P-100 Lift System is designed to be mounted primarily to a vehicle hitch system. Before lift installation, ensure that the hitch shows no signs of rust or wear and that the front and rear vehicle suspension is acceptable. If any vehicle alterations are necessary, make sure that you fully understand the instructions for drilling or cutting before making any alterations.
WARNING! Before drilling or cutting into the vehicle, make absolutely certain through visual inspection that there are no obstructions in the path of the drill bit, such as the fuel tank, exhaust pipes, or electrical wires.
LIFTING NON-PRIDE PRODUCTS
The Power Tote P-100 Lift System is an extremely versatile device, which users may employ to lift items other than Pride products. Pride has no control over such use, nor can Pride anticipate every possible use to which a lift system may be put. Lifting non-Pride products with the Power Tote P-100 is done at the operator’s own risk, and Pride accepts no liability for damage or injury resulting from such use.
PRELIFT INSPECTION
Before operating the Power Tote P-100 Lift System, inspect your surroundings to ensure that the lift system has a clear path of operation. Remove any possible obstructions before operating the lift and do not allow children to operate or play near the lift.
OPERATOR POSITIONING
The operator of the lift should stand a safe distance from the unit being lifted/lowered to ensure that his/her feet are never positioned under the raised lift platform. The operator should also keep his/her hands clear of the lift system to avoid the potential for injury.
TRANSPORT VEHICLE POSITIONING
Be sure your vehicle is parked on flat, level ground before attempting to load, lift, or remove a wheelchair with the Power Tote P-100 Lift System. Make sure the vehicle emergency park brake is engaged before loading or unloading a wheelchair.
