Pride Mobility Quantum 500 manual To adjust the leg rest length, Multi-Axis Foot Plate

V . C O M F O R T A D J U S T M E N T S

To adjust the leg rest length:

1.Remove the adjustment screws from the leg rest extension.

2.Slide the leg rest up or down to the desired length.

3.Align the adjustment holes in the leg rest extension and reinstall the adjustment screws.

Multi-Axis Foot Plate

The multi-axis foot plate assembly can be installed on either a swing-away footrest or an elevating leg rest. The multi- axis foot plate has four adjustments: leg rest length (A), po- sition (B), tilt (C), and angle (D). See figure 22.

To change leg rest length (A):

1.Remove the hardware.

2.Move the leg rest to the desired position.

3.Reinstall the hardware.

To change foot plate position (B):

1.Remove the hardware.

2.Move the foot plate to the desired position.

3.Reinstall the hardware.

To change foot plate tilt (C):

1.Loosen the hardware.

2.Tilt the foot plate to the desired position.

3.Tighten the hardware.

To change foot plate angle (D):

1.Turn the setscrew clockwise to decrease the angle.

2.Turn the setscrew counterclockwise to increase the angle.

A

B

C

D

A

B

C

D

SETSCREW SETSCREW

Figure 22. Multi-Axis Foot Plate (ELR Shown)

Quantum 500 www.quantumrehab.com 27