Pride Mobility SC100 Rear Section, Onboard Battery Charger not shown, Ammeter and Charger Cord

V . D E S C R I P T I O N

REAR SECTION

The onboard battery charger (not shown), the charger cord, the battery charger fuse (not shown), the batter- ies, the electronic controller assembly, the main circuit breaker, the manual freewheel lever, the anti-tip wheels, and the motor/transaxle assembly are located on the rear section of your Shuttle. See figures 8 and 8A.

MAIN CIRCUIT BREAKER BATTERIES

CHARGER CORD

AMMETER	ANTI-TIP WHEEL
BATTERY CONNECTORS	MOTOR TRASAXLE
	ASSEMBLY
REAR	MANUAL FREEWHEEL LEVER
DOOR
FIGURE 8. REAR SECTION	FIGURE 8A. REAR SECTION

Onboard Battery Charger (not shown)

The onboard battery charger converts household current (AC) to direct current (DC) and charges the batter- ies of your Shuttle. See VI. “Batteries and Charging.”

νThe charger is located behind the batteries and at the forward right corner of the rear section.

νThe charger is a box with cooling fins on the exterior of its case.

Ammeter and Charger Cord

On the rear shroud, above the chrome bumper, is a compartment door secured by a black rubber latch. Inside this compartment is the charging ammeter and power cord for the scooter’s onboard charger.

NOTE: The ammeter is operational only when the charger power cord is plugged into a standard wall outlet.

Battery Charger Fuse (Not shown)

The fuse has been incorporated into your charger to protect it from damage in the event of an electrical problem.

CAUTION! The replacement fuse must match the rating of the original fuse exactly. If you install a fuse with an incorrect rating, you may damage the charger. Contact your local Pride provider for fuse rating information.

Batteries

The batteries store the electrical energy that powers your Shuttle. See VI. “Batteries and Charging.”

Shuttle 15