V I . B A T T E R I E S A N D C H A R G I N G

CHARGING THE BATTERIES OFF THE SCOOTER

If you prefer to leave your scooter inside a vehicle or in a place where an electrical outlet is not available, you can remove the battery pack from the scooter and charge the batteries using the optional Y-harness.

1. Remove battery pack. See IX. “Disassembly and Assembly.”

2. Place the battery pack near an electrical outlet.

3. Connect the Y-harness to the battery harnesses that extend from the battery pack. See figure 11.

4. Plug the appropriate end of the charger power cord into the mating end of the Y-harness.

5. Plug the off-board charger power cord into an elec- trical outlet.

Y-HARNESS

FUSE

BATTERY CHARGER

BATTERY PACK

CONNECT HERE

Figure 11. Off-Board Battery Charger

Follow these steps to properly break-in your scooter’s new batteries for maximum efficiency and service life.

1.Fully recharge any new battery prior to its initial use.

2.Operate your new scooter in familiar and safe areas. Drive slowly at first, and do not travel too far from your home or familiar surroundings until you have become accustomed to your scooter’s controls.

3.Fully recharge the batteries.

4.Operate your scooter again.

5.Fully recharge the batteries again.

6.After four or five charging cycles, the batteries are able to receive a charge of 100% of their peak performance level and are able to last for an extended period of time.

24

www.pridemobility.com

Sonic

Page 24
Image 24
Pride Mobility SC52 owner manual Charging the Batteries OFF the Scooter

SC52 specifications

The Pride Mobility SC52, also known as the Go-Go Elite Traveler 4-Wheel scooter, is a popular choice among individuals seeking mobility solutions that combine ease of use, maneuverability, and comfort. This scooter is designed for both indoor and outdoor use, making it versatile for various lifestyles and environments.

One of the main features of the SC52 is its 4-wheel design, which enhances stability and provides a smooth ride over various terrains. With a top speed of 4.5 miles per hour and a driving range of up to 12 miles on a single charge, users can navigate both urban streets and suburban sidewalks with confidence. The dual motor design offers exceptional acceleration while remaining energy efficient, allowing users to make the most out of each charge.

The SC52 is equipped with ergonomically designed, comfortable seating that includes flip-back arms to facilitate easy transfer in and out of the scooter. The seat height is adjustable, ensuring that users can find their optimal position for driving. Moreover, the unit features a delta tiller, which requires minimal strength to operate, making it accessible for users with varying levels of dexterity.

Another noteworthy characteristic of the SC52 is its lightweight, portable design. The scooter can be easily disassembled into five lightweight sections, making it ideal for transport in cars, buses, or trains. Each section is crafted to ensure maximum portability without compromising on durability.

In terms of technology, the Pride Mobility SC52 includes an advanced battery management system. This feature not only extends the life of the batteries but also provides users with information about battery status through an easy-to-read LED display. Safety features are also a priority in the SC52, which is equipped with anti-tip wheels, powerful LED headlights for visibility in low-light conditions, and a secure braking system.

With a variety of color options and accessories, such as storage baskets and weather protection, the Pride Mobility SC52 caters to personal preferences and lifestyle needs, making it a standout choice in the mobility scooter market. Whether for daily errands or leisurely outings, the SC52 offers an unparalleled combination of reliability, comfort, and style.