- 2 -
4. External Connection Warning:
If you have an external connection installed in your duplicator,
you will see the USB/Firewire switch(s) on the back of your
duplicator, and/or USB/Firewire sticker(s) on your writer front
drive panel(s). In order to operate the duplicator solely as a
standalone unit (no connection to the computer), you have to
make sure all of the USB/Firewire connection light(s) on the
back of your duplicator are off. If by any chance, the
USB/Firewire connection light(s) are on, you need to follow
the following steps: 1. Turn off your duplicator. 2. Turn off the
USB/Firewire switch(s), 3. Turn on your duplicator. 4. Make
sure all the USB/Firewire lights are off.
5. Maintenance:
It is very important to operate and keep the duplicator in a dust
free, clean environment since dust is the number 1 killer for
CD/DVD recording devices. Failure to do so may severely
damage your duplicator. We strongly suggest you place an Air
Cleaner next to the duplicator and constantly use the Air Duster
(Can Air) to clear off any dust on the surface of the duplicator.
Do not try to use the Air Duster to clean the
duplicator while the reader/writer trays are open.
In doing so, you may inadvertently blow dust into
the recording device and damage the recording
device.
6. Proper Shutdown:
To avoid possible system failures, you need to shutdown the
duplicator properly. To shutdown the duplicator, you need to
press “>>” button to “15. Shutdown” and follow instructions
on the screen to shutdown the duplicator properly. Turning off
your duplicator without performing this function will increase
the risk of damaging your duplicator.