1Unpacking Your Printer

4Connecting the USB Cable / Installing the Printer Driver

The following items are contained inside the box:

•Printer

•Power Adapter

•Separate Power Cord

•USB Cable

•Software Installer CD

•Black Ink Cartridge

•Starter roll of high gloss label stock

•This manual and other printed information Save the carton and packing materials. They will come in handy when transporting the printer.

Connect the printer to your PC with your beige USB 2.0 Cable.

Select "Install the software automatically" and click Next. You may see a notice like the one shown here stating that the Printer has not passed Windows Logo Testing. Click Continue Anyway to continue installing the printer driver for your Publisher.

2Installing the Software

Installing the PC Software

The Installer Disc has a menu that will guide you through the process of setting up your printer. Please refer to the following for more information on each step:

1.Place the Installer CD in your CDRom Drive. The

Installer

application should automatically launch in a few moments. If it does, proceed to Step 2. If it

does not automatically launch,

3Connecting Power

1.Locate the power adapter supplied with your printer.

2.Place one end of the adapter cord into the power port on the rear panel of the printer.

3.Plug the power cord of the adapter into an available wall outlet or surge protecting power strip. Once the power cord is con- nected, the printer can be switched on and off using the power switch.

follow these steps:

•Double-click the My Computer Icon, then double-click the icon of the appropriate CD drive containing the Software Installer disc.

•Double-click Installer.exe

2.In the Installer Application, click the Standard Install button. Steps 3-6 are shown below as well as on the monitor. You may follow either to complete the setup.

After a few moments, Windows will tell you it has found new hardware and is looking for software to install it.

5Installing Label Stock

Your printer will utilize a wide variety of paper label stock. See Section 5 in the Users Manual for label and roll specifications.

1.Open the Top Cover.

2.Pull the spring loaded label stock guide

out far enough to fit the label roll.

Note: Remove any shipping tape from your label stock roll

 

to ensure that it can unroll freely, making certain

Label Stock Guide

that no adhesive portion is exposed.