Princeton SP-88 user manual Utility

button or the [-] button to adjust the level value. The LCD displays the current level value. The default value is 92.

Press the [+] button and the [-] button simultaneously will set the tune value to the default. The default value is 000.

Chorus Type

A total of 8 different chorus types are available. Use the dial,the [+] button or the [-] button to select the chorus type. LCD takes turns to display Chorus1/Chorus2/Chorus3/Chorus4/ Feedback/Flanger/Short delay/FB delay. The default type is Chorus3.

Chorus Level

It ranges from 0 to 127. Use the dial, the numeric keypad [0]-[9] button, the [+] button or the [-] button to adjust the level value.

The LCD displays the current level value. The default value is 0.

Harmony Type

You can add a variety of harmony notes to your performance in the right-hand section.

A total of 8 different harmony types are available. Use the dial, the [+] button or the [-] button to select the harmony type. LCD takes to turns display Duet/1+5/Country/Trio/Block/ 4 Close1/4 Close2/4 Open. The default type is Duet.

Utility

Press the [FUNCTION] button. Select "Utility" menu. Press the [NEXT] button to select Tune Value/Touch Type/Voice R1 Octave/Voice R2 Octave/Voice L Octave/Pitch Bend Range/Split Point/Pedal Assign. Use the dial, the [+] button or the [-] button to select the utility sub-menu. Press the [NEXT] button to enter parameter setting.

Tune Value

In the Tune Value setting, LCD displays the current tune value. Use the dial, the [+] button or the [-] button to adjust the tune value. This function can apply to the right area of keyboard. The parameter range -50 to 50.

Note:

When the tune value is +50, the note has changed 100 cents.

When the tune value is 50, the note has changed -100 cents.

Touch Type

In the touch type setting, use the dial, the [+] button or the [-] button to select the touch type. A total of 3 different touch types are available. They are Soft/ Medium/Hard. The default type is Medium.

VOICE R1 OCTAVE

In the voice R1 octave setting, LCD displays the current octave value. Use the dial, the [+] button or the [-] button to adjust the voice R1 octave value. This function can apply to the right area of keyboard. The parameter range -1 to 1. The default value is 0.

Press the [+] button and the [-] button simultaneously to set the octave value to the default.It can function after pressing the [DUAL] button and selecting VOICE R1.

VOICE R2 OCTAVE

In the voice R2 octave setting, LCD displays the current octave value. Use the dial, the [+] button or the [-] button to adjust the voice R2 octave value. This function can apply to the right area of keyboard. The parameter range -1 to 1. The default value is 0.

Press the [+] button and the [-] button simultaneously will set the octave value to the default one. It can function after pressing the [DUAL] button.