Controls, features and connections
1Motor transportation screw (marked red)
2Stepped drive pulley
3 | Drive belt * | 3a Hook * |
4Hub
5Platter with felt mat *
6 | Tonearm counterweight * | 6a | Downforce scale |
7 | Tonearm lift lever |
|
|
8/18 | Tonearm rest and removable transport lock | ||
9 | Tonearm tube | 9a | Tonearm base |
10Lid *
11Lid hinges
12Hinge fasteners
13Power supply socket
14Signal output cable
15Anti-skating weight adjustment scale
16Anti-skating weight *
17Anti-skating weight support hoop
20On/off switch
21Headshell with finger lift and fitted Ortofon OM 5E cartridge
22Motor
23Single adapter *
Power supply (not shown) *
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO record player.
In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
**Your turntable has been delivered with a factory fitted and adjusted cartridge, please ignore the cartridge set up instructions unless changing the cartridge at a later date.
During assembly and adjustment of the deck small parts could be lost if not carefully placed in a suitable receptacle. Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical drawings above. Separately packed items are marked with an asterisk *.
Set-up
Make sure the surface you wish to use the turntable on is level (use a spirit level) before placing the turntable on it. Remove the two red transport screws (1) which secure the motor (22) during transportation.
Remove the transport lock (18) from the tonearm. Store it together with the two red motor transport screws
(1) in the original packaging so they are available for any future transportation.
© Audio Trade GmbH · | 3 |
|