Maintenance and cleaning
Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic cloth. Never use a dry cloth because this will create static electricity which attract more dust! Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage.
If the player is not used over a long period of time the drive belt can be removed to prevent unequal stretching.
!
Always disconnect the record player from the mains power supply as a precaution before maintenance!
Fitting and connecting the cartridge
**All cartridges with half inch mounting holes can be fitted. Leaving the needle's protection cover on, fit the cartridge to the headshell using the screws supplied with the cartridge by passing one screw through each slot in the headshell (10). Do not tighten the nuts yet.
Connect the tonearm wires to the cartridge pins as follows:
white | left channel positive (L+) |
red | right channel pos. (R+) |
green | right channel return (R |
blue | left channel return (L |
The full sound quality of the record player can only be achieved if the cartridge is correctly adjusted. Particular tools like the
If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your
Please note: adjusting a cartridge and tonearm calls for the greatest care in order to avoid damaging the cartridge or tonearm bearings. Leave this work to your dealer if you are in any way unsure of the necessary steps and precautions to be taken.
Useful tips
The record player should be positioned on a
Technical specifications |
|
Nominal speeds | 33,33/45,11 r.p.m. |
Speed variance | ±0,8% |
Wow and flutter | ±0,15% |
Signal to noise |
|
Downforce range |
|
Effective tonearm length | 8,6 " (219mm) |
Overhang | 19mm |
Power consumption | 2W |
Outboard power supply | 16V/200mA AC, suitable for your country's mains supply |
Dimensions (W x H x D) | 380 x 115 x 350mm |
Weight | 3,3kg |
© Audio Trade GmbH · | 5 |
|