840112900 ENv01 3/18/03 3:21 PM Page 4
7.The motor will begin turning the can and cutting the lid. (It is not necessary to hold the piercing lever down or to hold the can during the cutting action.)
8.The motor will automatically stop when the can is open.
Hints for Best Use
•The can opener will easily open all standard size cans.
•On some models it will be necessary to position can opener at edge of counter, allowing for clearance to open cans taller than the can opener.
•If there is a bump, dent, or heavy seam in the rim of the can, open the other end of the can or start cutter just beyond it.
•Cans made with aluminum lids will not adhere to the magnet.
•The motor of your can opener is permanently lubricated and will require no oiling.
•To use the cord storage on the back of the opener, push in or pull out the cord as needed.
Cleaning Your Can Opener
1.Unplug cord from electrical outlet.
2.Remove complete cutting
assembly as shown. Push piercing lever up and to the left. It will pop out of a locked position.
3. Wash cutting assembly in hot, soapy water. Rinse and dry thoroughly.
4. Wipe body of can opener with damp cloth. NEVER immerse the can opener in water.
5.To reassemble, place knob
on back of cutting assembly into large end of keyhole as shown. Push to the right until it snaps into place.
Sharpening Knives
This feature on selected models.
1.Place cutting edge of knife in the knife slot located on the back of the can opener.
4 | 5 |
