Profile 400SX TWO Channel Signal Connections, Four Channel Signal Connections

SIGNAL CONNECTIONS

Connect the RCA output of the head unit (AM/FM cassette player, CD, or DAT) to the RCA input terminals of the amplifier.

To make these connections, we recommend high quality RCA cables, which are available at your local car audio retailer. Run signal wires away from electrical wires to avoid possibility of induced noise from the car's electrical system (i.e. popping noises or engine noise). Please note that when making these connections the signal inputs correspond with the speaker outputs. For example: If you connect the radios front right RCA to "CH 1".......then speaker output

"CH 1" will operate the front right speaker.

TWO CHANNEL SIGNAL CONNECTIONS

Hi-Level Input	Input	Level
L+ L- R+ R-
	Left
				Low	Hi
		Min	Max		Off
	Right				94.7
			R	L

FOUR CHANNEL SIGNAL CONNECTIONS

(RADIO WITH FRONT AND REAR OUTPUTS)

L R

	Bass	X-over			Level		Input
Boost			85
				Filter		CH1	CH3
				Low	Hi
0	12	40	130	Off	Min	Max	Min
						CH2	CH4

	Bass	X-over			Level		Input
Boost			85
				Filter		CH1	CH3
				Low	Hi
0	12	40	130		Min	Max	Min

	94.7
	R L
FRONT	REAR

FOUR CHANNEL SIGNAL CONNECTIONS

(RADIO WITH ONLY ONE SET OF RCA'S)

94.7

R L Connect 2 sets of RCA "Y"adaptors to split

the two RCA's from the radio into 4 outputs

(Not Provided)

7