SPEAKER CONNECTIONS (BRIDGED)
The California amplifiers are capable of being bridged in a mono configuration. This feature allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel. In this configuration the amplifier sums the right and left channel to deliver one channel (mono) output.
Please note: in order for the amplifier to sum right and left signal information, both right and left RCA connections must be made.
**CAUTION! In the bridged mode, the amplifier must see a 4 Ohm load or higher. Any lower than 4 Ohms will cause the amplifier to overheat and possibly cause permanent damage to the amplifier!
TWO CHANNEL BRIDGED SPEAKER CONNECTIONS
B+ REM GND
Bridged
Fuse
Speaker
Output
LR
+ -
4 Ohm Speaker
(Minimum)
FOUR CHANNEL BRIDGED SPEAKER CONNECTIONS
CH3 | CH4 | REM | GND |
| B+ | ||
CH1 | CH2 |
|
|
Bridged | Fuse |
|
|
CH1 CH2 |
|
|
|
Bridged
CH3 CH4
Speaker
Output
+-
+-
4 Ohm Speaker
(Minimum)
4 Ohm Speaker
(Minimum)
11
