Profile SF720 installation instructions Introduction, Parts List, Installation, Specifications

INTRODUCTION

Congratulations on your purchase of a Profile state-of-the-art speakers. Your selection of a Profile car audio product indicates a true appreciation of fine musical reproduction. Whether adding to an existing system or including your Profile speakers in a new system, you are certain to notice immediate performance benefits.

Before mounting the speakers, select a location that allows for at least 58mm (2 1/4”) of mounting depth for top mount or 68mm (2 5/8”) of mounting depth for bottom mount. The speaker inside the door must not come in contact with the window when rolled down. Additionally, the speaker should be out of the way of torsion bar springs, window cranks and door handles allowing for normal operation.

PARTS LIST

RETAINING CLIPS

SPACERS

TEMPLATE

SPEAKER WIRES	MOUNTING
	SCREWS
LENGTH: 3m (9’ 10”)
	SIZE: 4 x 25mm

INSTALLATION

BEFORE STARTING YOU WILL NEED TO DETERMINE

IF YOU HAVE FACTORY LOCATIONS WITH CUTOUTS

AND PRE-DRILLED MOUNTING HOLES. IF SO, SKIP TO

STEP . IF NOT, USE THE ENCLOSED TEMPLATE TO

MARK THE AREA TO CUT AND DRILL HOLES.

3.3mm (5/32”)

IMPORTANT!: THE SMALLER SPILT HOLE
ON THE CLIP SHOULD BE ON THE TOP
SIDE OF THE REAR DECK AND THE
LARGER HOLE SHOULD BE ON THE
BOTTOM SIDE (TRUNK SIDE) OF	CONNECT SPEAKERS.
THE REAR DECK.

INSERT RETAINING CLIP OVER HOLE

ON THE REAR DECK OR IN DOOR PANEL.

	SPECIFICATIONS
SF720
Speaker	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 x 7” 2-Way
Woofer Cone	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Carbon Polypropylene
Tweeter	. . . . . . . . . . . . . . . . 1" Titanium Dome with Neodymium Magnet
Surround	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Butyl Rubber
Maximum Input Power	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Watts
Nominal Input Power	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5~60 Watts RMS

PLEASE NOTE: IF YOU ARE REPLACING FACTORY SPEAKERS, YOU DO NOT NEED TO USE THESE CLIPS AND YOU SHOULD USE THE FACTORY SCREWS TO MOUNT THE SPEAKERS.

MOUNT SPEAKERS.

DOOR MOUNT

VEHICLE’S FACTORY GRILLE

(NOT INCLUDED)

SOLID	BLACK
COLOR WIRE	STRIPED WIRE
	TO RADIO OR AMPLIFIER

REAR DECK MOUNT

Impedance	. . . . . . . . 4 Ohms
Magnet Weight	. . . . . . . . . 20 Oz.
Sensitivity	. . . . 92 dB/W/m
Frequency Response	40 ~ 22,000 Hz

TO RADIO OR

AMPLIFIER

1 2 SF720