Metal Contacts

5Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the incline buttons. Each time one of the buttons is pressed, the incline will change by 0.5%. The but- tons can be held down to change the incline rapidly.

Note: In the incline display, the first indicator will light when the incline is set at 1.5%. The second indicator will light when the incline is set at 2% or 2.5%, the third indicator will light when the incline is set at 3% or 3.5%, and so forth. After the incline buttons are pressed, it will take a moment for the treadmill to reach the selected incline setting.

6

Follow your progress

with the LED track and

the four displays.

 

 

 

The LED TrackÑ The LED track rep- resents a distance of 1/4 mile. As you exercise, the indi- cators around the track will light one at a time until you

have completed 1/4 mile. A new lap will then begin.

DISTANCE/LAPS

 

 

 

 

 

 

 

 

Arrow

 

displayÑThis display

 

 

 

 

 

shows the distance that

 

 

 

 

you have walked or run

 

 

 

 

and the number of laps

 

 

 

 

 

 

 

 

you have completed (one

 

 

 

 

lap equals 1/4 mile). The display will alternate

between one number and the other every seven

seconds, as shown by the arrows in the display.

TIME/PACE displayÑ

This display shows the elapsed time and your cur- rent pace (pace is mea-

sured in minutes per mile). The display will alternate

between one number and the other every seven seconds, as shown by the arrows in the display.

SPEED displayÑThis

display shows the speed of the walking belt, in miles per hour or kilome-

ters per hour. The letters ÒMPHÓ or ÒKPHÓ will ap-

pear to show which unit of measurement is selected.

To change the unit of

measurement, hold down the START/STOP button while inserting the key

into the console. An ÒE,Ó for english miles, or an

ÒM,Ó for metric kilometers, will appear in the DIS- TANCE/LAPS display. Press the SPEED button to change the unit of measurement. Remove and then reinsert the key.

CALS/FAT CALS/

PULSE displayÑThis

display shows the ap- proximate numbers of

calories and fat calories you have burned (see

FAT BURNING on page 17). Every seven sec- onds, the display will change from one number to the other, as shown by the arrows in the display. This display will also show your heart rate when the pulse sensor is used (see step 7).

7Measure your heart rate, if desired.

Stand on the foot rails and place your

hands on the

metal contacts on the handrail. Your palms

must be resting on the upper

contacts, and your fingers must be touching the lower contactsÑ

avoid moving

your hands while measuring your heart rate. After a moment, the heart-shaped indicator in the CALS/FAT CALS/ PULSE display will flash steadily and a ÒPÓ will appear in the display. After a few seconds, three dashes (Ð Ð Ð) will appear in the display and your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds.

12

Page 12
Image 12
ProForm 831.297793 user manual Distance/Laps, CALS/FAT Cals