THE INFORMATION MODE
The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button, insert the key into the console, and then re- lease the Stop button. When the information mode is selected, the following information will appear in the display:
The upper left corner of the lower display will show the num- ber of hours that the treadmill has
been operated. The lower right corner of the display will show the total number of miles or kilometers that the walking belt has moved. In addition, an “E” for English miles or an “M” for metric kilometers will ap- pear in the upper right corner of the display. To change the unit of measurement, press the Speed increase button. The lower left corner of the display will show the volume level. To change the volume level, press the Incline increase button.
The console fea- tures a display demo mode, de- signed to be used if the tread- mill is displayed
in a store. While the demo mode is turned on, the con- sole will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a “d” will appear in the upper dis- play while the information mode is selected. To turn on or turn off the demo mode, press the Speed decrease button.
You can select an audio setting if desired. When you use an iFit card, a personal trainer will guide you through your workouts. If a “P” appears in the upper display, the personal trainer will give you detailed in- structions. If no “P” appears, your personal trainer will
simply guide you through your iFit workouts. To change the audio setting, press the Incline decrease button.
To exit the information mode, remove the key from the console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers
To purchase the optional chest pulse sensor, call the telephone number on the front cover of this manual.
HOW TO ADJUST THE CUSHIONING SYSTEM Remove the key from the console and unplug the power cord. The treadmill features a cushioning sys- tem that reduces the impact as you walk or run on the treadmill. To increase the firmness of the walking plat- form, step off the treadmill and slide the platform cush- ions toward the front of the treadmill. To decrease the firmness, step off the treadmill and slide the platform cushions toward the back of the treadmill. Note: Make sure that both cushions are set at the same firm- ness level. The faster you run on the treadmill, or the more you weigh, the firmer the walking plat- form should be.
Platform |
|
Cushion |
|
| Increase |
Decrease | Platform |
| |
| Cushion |
| Walking Platform |
19 |
|
