PROBLEM: The walking belt slows when walked on |
| |
SOLUTION: | a. If an extension cord is needed, use only a | 2 |
| than 1.5 m (5 ft.). |
|
b. If the walking belt is overtightened, treadmill perfor- |
| |
mance may decrease and the walking belt may be- |
| |
come damaged. Remove the key and | UNPLUG THE | |
POWER CORD | . Using the allen wrench, turn both |
rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt
b |
|
Rear Roller Adjustment Bolts |
c. If the walking belt still slows when walked on, please call our Customer Service Department.
PROBLEM: The walking belt is
SOLUTION: | a. If the walking belt has shifted to the left, | first re- | ||
| move the key and |
| UNPLUG THE POWER CORD | . |
| Using the allen wrench, turn the left rear roller bolt |
| ||
| clockwise 1/2 of a turn. Be careful not to overtighten |
| ||
| the walking belt. | If the walking belt has shifted to |
| |
| the right, | turn the left rear roller bolt counterclockwise |
| |
| 1/2 of a turn. Plug in the power cord, insert the key |
| ||
| and run the treadmill for a few minutes. Repeat until |
| ||
| the walking belt is centered. |
|
a
b. If the walking belt slips when walked on, first remove |
| |
the key and | UNPLUG THE POWER CORD | . Using |
the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt
Repeat until the walking belt is properly tightened.
b |
PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com
CD’s and videos are played
SOLUTION: | a. With the key in the console, press one of the Incline buttons. | While the incline is changing, re- | |
| move the key. | After a few seconds, | |
| maximum incline level and then return to the minimum level. This will recalibrate the incline system. |
13